What Is The MPEG Filter Setting?
The MPEG Noise Filter option (Menu > Picture > Picture Options > MPEG Noise Filter) will help eliminate any excess digital noise in a picture and help to reduce any flicker caused by this. This option is intended for digital video signals. There are five options for setting MPEG Noise
Performing A Factory Reset
When to Perform a Factory Reset Important: Be sure to go through all other troubleshooting steps before performing a factory reset. The factory reset should be the last thing you do before setting the TV up for service. Important: When you perform a Factory Reset, all your settings revert to
TV Appears To Turn Off By Itself
There are four cases in which your TV either turns itself off or appears to turn itself off. These cases are listed in the following table by category. Your TV Appears To Be Off If You Are Using The TV As A Computer Monitor If you are using the TV as a monitor and the Stand-by light only
How-To Perform A Self Diagnosis
To perform a Self Diagnosis test, follow these steps: Turn the TV on. Press MENU on the TV remote, or on the TV itself. Use the or arrow button on the remote to select the System or Support section of the menu (depending on your model), and then press ENTER. System
Resetting The Picture And Sound Mode To Default Settings
Most LCD TVs have three or four automatic picture modes, for example, Dynamic, Standard, Movie, etc. Each mode has its own, independent group of settings (color, tint, contrast, etc When you change a picture setting in a mode, you change the setting for that mode only. The change does not
Feature: How To Run a Self-Diagnosis On Your TV (2010 - 2012 Models)
How To Run a Self-Diagnosis on your TV (2010 - 2012 Models)
Display: How Do I Adjust The Color On My TV? (LCD TV)
Generic instructions for adjusting the color settings on your TV. (LCD TV)
Setup: How To Auto Program Your LCD TV Channels From A Cable Signal (2011)
How To Auto Program Your LCD TV Channels From A Cable Signal (2011)
Operation: How To Reset The Picture Or Audio Settings On My LCD TV To The Factory Settings? (2008 -2012)
Instructions on how to reset the TV picture or audio setting back to defaults without reseting all TVs settings back to factory defaults
Connect: How To Connect A Cable Line To Your TV And Have The TV Memorize Channels (2008 - 2010)
Instructions on connecting an incoming direct (coax) cable from your cable provider to the TV and program in your channels
Feature: How To Use Game Mode On Your LCD TV (2008 - 2012 LNxxA - LNxxE)
A step-by-step guide on how to use the game mode feature.
Operation: How To Perform A Factory Reset On 2008 Through 2011 Model LCD TVs (LN**A ~ LN**D)
A step-by-step guide for returning your TV to the factory defaults (LN**A ~ LN**D)
Connect: How To Connect A DVD Player To My TV (LCD TV)
General Instruction on connecting a DVD player to your TV (LCD TV)
Display: How To Change The Aspect Ratio On Your LCD TV (2008 - 2012 LN**A ~ LN**E)
A step-by-step guide that will walk you through how to adjust the aspect ratio of your TV.
Will Netflix work on my 2009/B Series TV?
In 2009, we released several different TVs that had the ability to tie into your network. With these new functions, we added Yahoo! Widgets (a.k.a Internet@TV), Media Play 2.0, and something called Home Network Center. With Yahoo! Widgets, you could pull content and media from many different
Which Samsung TVs Have An ATSC (Digital) Tuner?
All TVs made from 2007 through current models include an ATSC tuners. Legacy Models Of the 2006 models, all Samsung HL-S series DLP TVs, all LN-S series LCD TVs ending with a D (for example, LN-S3269D), all SP-S and HP-S series Plasma TVs, and all TX-S series SlimFit TVs have a built-in ATSC
What Is The White Balance Setting?
White balance is an adjustment to remove unrealistic color casts. With this option you can fine tune the picture so objects that should be white are rendered white on your scren. This option is more of a fine tuning option then the Color tone option. In this setting you will be able to adjsut
Why Can't I Select Game Mode?
Depending on your TV, Game mode might not be available for all input sources. For example: On the HL-S5078, 5678, 6178, or 7178, Game mode was only available for AV1, AV2, AV3, S-Video1, S-Video2, S-Video3, Component1 and Component2, but not HDMI or DVI. To find out which sources Game mode is
What Is xvYCC?
xvYCC (Extended-gamut YCC) is a new color space (color range) standard for televisions, computer monitors, digital camcorders and cameras, etc. xvYCC supports up to 1.8 times more colors than the current standard. Starting in 2007 a few Samsung LCD, DLP, and Plasma TVs are capable of
Why Doesn't A Wide Screen DVD Fit My Wide Screen TV?
Many older movies available on DVD, though labeled wide screen, were produced in a wide screen format (for example, Cinemascope or Academy Flat) which are a wider aspect ration than the current 16:9 wide screen TV standard. When you play one of these movies, your wide screen TV will display
Where Can I Get A Replacement Remote?
Ordering a New Remote You can order a Samsung remote from J&J International, our Authorized Parts Distributor. To go to J&J on line, click here. After the J&J web page appears, enter either the model number of your TV into the Model Number field in the upper left corner or the remote control
What Is The Power Consumption Of My TV In Watts?
To find the power consumption of your TV you can look in three places; On the back of your TV there will be a sticker that will contain the power consumption of the unit as well as other information. In the specifications portion of your user manual. To download a copy of your user manual
What Is The Snowy Line On The Top Of The Screen?
When you set your TV to JustScan, you may see a snowy, garbled, black and white line on the top of the screen. Usually, this is caused by something called overscan. Typically, overscan extends the picture beyond the edges of your TV set so that when you view a picture, there are no blank or
What Kind Of Cable Do I Need To UseThe Digital Optical Output On My TV ?
To use the Digital Optical output jack on your TV, you need a standard Digital Optical cable. A standard Digital Optical cable is a fiber optic cable with a TOSLINK connector at both ends. An example of a TOSLINK connector is below.