What Is The MPEG Filter Setting?
The MPEG Noise Filter option (Menu > Picture > Picture Options > MPEG Noise Filter) will help eliminate any excess digital noise in a picture and help to reduce any flicker caused by this. This option is intended for digital video signals. There are five options for setting MPEG Noise
Performing A Factory Reset
When to Perform a Factory Reset Important: Be sure to go through all other troubleshooting steps before performing a factory reset. The factory reset should be the last thing you do before setting the TV up for service. Important: When you perform a Factory Reset, all your settings revert to
TV Appears To Turn Off By Itself
There are four cases in which your TV either turns itself off or appears to turn itself off. These cases are listed in the following table by category. Your TV Appears To Be Off If You Are Using The TV As A Computer Monitor If you are using the TV as a monitor and the Stand-by light only
How-To Perform A Self Diagnosis
To perform a Self Diagnosis test, follow these steps: Turn the TV on. Press MENU on the TV remote, or on the TV itself. Use the or arrow button on the remote to select the System or Support section of the menu (depending on your model), and then press ENTER. System
Resetting The Picture And Sound Mode To Default Settings
Most LCD TVs have three or four automatic picture modes, for example, Dynamic, Standard, Movie, etc. Each mode has its own, independent group of settings (color, tint, contrast, etc When you change a picture setting in a mode, you change the setting for that mode only. The change does not
Feature: How To Run a Self-Diagnosis On Your TV (2010 - 2012 Models)
How To Run a Self-Diagnosis on your TV (2010 - 2012 Models)
Display: How Do I Adjust The Color On My TV? (LCD TV)
Generic instructions for adjusting the color settings on your TV. (LCD TV)
Setup: How To Auto Program Your LCD TV Channels From A Cable Signal (2011)
How To Auto Program Your LCD TV Channels From A Cable Signal (2011)
Operation: How To Reset The Picture Or Audio Settings On My LCD TV To The Factory Settings? (2008 -2012)
Instructions on how to reset the TV picture or audio setting back to defaults without reseting all TVs settings back to factory defaults
Connect: How To Connect A Cable Line To Your TV And Have The TV Memorize Channels (2008 - 2010)
Instructions on connecting an incoming direct (coax) cable from your cable provider to the TV and program in your channels
Feature: How To Use Game Mode On Your LCD TV (2008 - 2012 LNxxA - LNxxE)
A step-by-step guide on how to use the game mode feature.
Operation: How To Perform A Factory Reset On 2008 Through 2011 Model LCD TVs (LN**A ~ LN**D)
A step-by-step guide for returning your TV to the factory defaults (LN**A ~ LN**D)
Connect: How To Connect A DVD Player To My TV (LCD TV)
General Instruction on connecting a DVD player to your TV (LCD TV)
Display: How To Change The Aspect Ratio On Your LCD TV (2008 - 2012 LN**A ~ LN**E)
A step-by-step guide that will walk you through how to adjust the aspect ratio of your TV.
Connect: How To Connect A High Definition Cable/ Satellite Box
Step-by step guide to connect your equipment and receive your HD signals.
Connect: How To Attach A Laptop Computer To Your TV
Instructions on how to connect a laptop to your TV using HDMI, HDMI-DVI, or VGA
Why Does My TV Make A Popping Or Cracking Noise After I Turn It Off?
The popping or cracking noises you hear after you turn off your TV are caused by different parts inside the TV contracting as they cool. It's caused by the thermal expansion the metal chassis of the TV goes through during the warm-up phase. These sounds are normal, and happen in a variety of
How Can I Tell What Model Year My TV Is?
To tell what year your TV is refer to the chart below Year 3rd Letter in the model code indicates model year. 2005 (DLP) HL-Rxxxx (LCD) LN-Rxxxx (Plasma) HP-Rxxxx 2006 (DLP) HL-Sxxxx (LCD) LN-Sxxxx (Plasma) HP-Sxxxx (Plasma) SP-Sxxxx 2007
My TV Is Connected Using The Component Connections And The Color Is Not Correct.
If you have your TV connected to an output device (source) using the Component connections and the color is not correct, follow these steps: Turn on your TV, and then turn on the Menu or change the TV to a different source (for example, from Component to Cable or HDMI). If the Menu colors
What Does Game Mode Do?
Game Mode is available on all current Samsung TVs. When you set a video source (input) to Game mode, your TV electronically bypasses two of the video signal processors in the TV, subsequently cutting down the amount of time the TV needs to process the video input from your game. You may notice
Which HDMI Cables Are Compatible With Samsung TVs?
2010 - 2013 Samsung TVs Samsung TVs in 2010 - 2012 either were HDMI standard 1.3 or 1.4. If your TV has the 3D feature it uses the 1.4 HDMI standard. All other TV's used HDMI 1.3 standard. 2007, 2008, 2009 Samsung TVs For those 2007, 2008, or 2009 Samsung TVs that have HDMI 1.3, you should
Accessories: Samsung's Evolution Kit (SEK-1000)
What is the Evolution Kit (SEK-1000) The Evolution Kit is a hardware kit that can attach to 2012 TVs with the Evolution Port LED Plasma UN**ES7500 UN**ES8000 PN**E7000 PN**E8000 Can I Use The Evolution Kit On Any Other TV? No, the evolution kit will only work with
Why Can't I Turn Closed Captions Off?
If you have turned off closed captions and they are still showing up on the TV, they are either part of the program and cannot be turned off or you are using a Cable Box, Satellite Box, DVD Player, or other external device. The TV can only turn on and off closed captions form an antenna or a
Which Samsung TVs Are HDCP Compliant?
HDCP (High-Bandwidth Digital Content Protection) are protocols used to protect the HD content being sent to your TV. If you are using an HDMI connection (and in other cases a DVI to HDMI connection) both devices are required to support the HDCP protocols. All 2005 through current model lineup