What Is The MPEG Filter Setting?
The MPEG Noise Filter option (Menu > Picture > Picture Options > MPEG Noise Filter) will help eliminate any excess digital noise in a picture and help to reduce any flicker caused by this. This option is intended for digital video signals. There are five options for setting MPEG Noise
When Ever I Turn On My External Samsung Device My TV Also Turns On
Usually when an external device connected to the TV is turned on you will be turning on the TV and switching it to that source. For example: When you turn on your Blu-ray player you will also usually turn on the TV and switch the TV to that source to watch a movie. Because of this Samsung
How To Perform A Self Diagnosis
To perform a Self Diagnosis test, follow these steps: Turn the TV on. Press MENU on the TV remote, or on the TV itself. Use the or arrow button on the remote to select the Support section of the menu, and then press ENTER. Note: In the menu the section names are displayed on the left
Resetting The Picture And Sound Mode To Default Settings
Most LCD TVs have three or four automatic picture modes, for example, Dynamic, Standard, Movie, etc. Each mode has its own, independent group of settings (color, tint, contrast, etc When you change a picture setting in a mode, you change the setting for that mode only. The change does not
TV Appears To Turn Off By Itself
There are four cases in which your TV either turns itself off or appears to turn itself off. These cases are listed in the following table by category. Your TV Appears To Be Off If You Are Using The TV As A Computer Monitor If you are using the TV as a monitor and the Stand-by light only
Feature: Picture-In-Picture (PIP) Setup (2008-2010)
A how-to guide explaining how to set up the cable connections to use PIP on many samsung television
Setup: (LN**A - LN**C) How To Add Channels To Your LCD TV Through The Auto Program Function
How To Auto Program Your LCD TV Channels From A Cable Signal (2008-2010 LN**A - LN**C)
Feature: How To Run a Self-Diagnosis On Your TV (2010 - 2012 Models)
How To Run a Self-Diagnosis on your TV (2010 - 2012 Models)
Operation: How To Perform A Factory Reset On 2008 Through 2011 Model LCD TVs (LN**A ~ LN**D)
A step-by-step guide for returning your TV to the factory defaults (LN**A ~ LN**D)
Feature: How To Use Film Mode (2008 -2010)
This is a step-by-step guide about how to use the Film Mode feature.
Display: How Do I Adjust The Color On My TV? (LCD TV)
Generic instructions for adjusting the color settings on your TV. (LCD TV)
Setup: How To Label The Inputs On Your TV (2008-2010)
A step-by-step guide on labeling your inputs.
Connect: How To Connect A Cable Line To Your TV And Have The TV Memorize Channels (2008 - 2010)
Instructions on connecting an incoming direct (coax) cable from your cable provider to the TV and program in your channels
Feature: How To Use Game Mode On Your LCD TV (2008 - 2012 LNxxA - LNxxE)
A step-by-step guide on how to use the game mode feature.
Connect: How To Connect A DVD Player To My TV (LCD TV)
General Instruction on connecting a DVD player to your TV (LCD TV)
Maintenance: How To Update Your Televisions Firmware (Software) Through The Service Port
Updating Your LCD TV's Firmware Via The Service Port
What Is The RGB Only Setting?
The RGB Only Mode option is used for calibration purposes only. With this option turned on the TV can apply a Red, Green, or Blue filter for use when calibrating the TV. Off: Disables RGB Only Mode. Red: Applies a Red Filter to the picture. Green: Applies a Green Filter to the picture.
How Do I Get Rid Of The Black Bars On The Sides Of My Screen?
When set to the 4:3 picture size, wide screen TVs typically have black space or bars to the left and right of the picture. To remove the black bars, you have to change your picture size. You can change the picture size in two ways: If your remote has a P. Size button, by pressing the P.
Networking: Using Windows Media Player 11 To Share Media To Your DLNA/Allshare TV
How to setup windows media player 11 to stream music, pictures, and video to your DLNA/Allshare TV
How To Use The Wireless LinkStick With Your Television
Connecting your television to your home network using the wireless Linkstick
Connect: How To Attach A Laptop Computer To Your TV
Instructions on how to connect a laptop to your TV using HDMI, HDMI-DVI, or VGA
How To Register Your Samsung Product
The easy to use guide will walk you through registering your Samsung Products
How To Update A Partial Product Registration
This easy to use guide will help you continue the registration process for your Samsung product.
How To Remove A Registered Product
This easy to use guide will help you remove a product that has been registered in error.