TV Will Not Power On
When troubleshooting a no power situation with your TV the first thing you want to check is the status of the standby light on the TV. The Standby light will appear in the lower right corner of the TV Standby Light Off Standby Light On Click below on the statement that
How To Perform A Self Diagnosis
To perform a Self Diagnosis test, follow these steps: Turn the TV on. Press MENU on the TV remote, or on the TV itself. Use the or arrow button on the remote to select the Support section of the menu, and then press ENTER. 2011-2012 Menu 2009-2010 Menu Note: In some
Dolby Is Not Available (Grayed Out) Even Though I Have A Dolby Digital Source
The SPDIF Output allows you to select the audio format that you would like to output the sound from your TV, PCM or Dolby Digital. However, there are restrictions on when the Dolby Digital signal is allowed to be selected. The Dolby Digital Audio format is only available to be selected when
The TV Is Not Parallel With The Stand
The most common reason for the TV and stand not to be in line is because the stand can swivel 20° in each direction. When the stand is first assembled sometimes the swivel mechanism can be stiff. To allign the stand an base you will need the assistance of another person. Have one person hold
Streaming Media ?
The DLNA / Allshare feature allows you to stream media from different DLNA certified devices to your TV. This integration of different devices makes sharing and accessing your content easier and more enjoyable. For example: If you have setup your computer to share media with your TV you can
Important: Before you unbox your TV make sure you have all the tools you will need and the space cleared where the TV will be put after assembly. For most TV unboxing and setup you will need something to cut the tape with and a Phillips head screw driver. Cut open the tape on one side of the
Installing The Stand
Tip: These instructions are general stand installation instructions. For model specific instructions please check your user manual. To attach the stand to your TV, follow the steps below: Note: To remove the stand, follow the steps in reverse order Attach the top part of the stand assembly
The Melody Plays When The TV Is Turned On, But Not When Turned Off
The Melody does not play when you turn the TV off for one of the following reasons: The Internal Mute is turned on The Volume is turned all of the way down or muted. To determine which troubleshooting path to take, turn the TV on, and then press [Volume +] on the TV remote. You will see
TV Will Not Power Off
Cyber If your TV is on but will not power off when you press the power button, you could be having an issue with your remote control or a faulty circuit inside your TV. To determine the source of your problem, follow these steps: Power the TV on if it is off. Unplug the TV from the wall
Feature: How To Use Game Mode On Your LED TV (2011 - 2012 UNxxD - UNxxE)
A step-by-step guide on how to use the game mode feature.
Display: (UN**D ~ UN**E) How To Change The Picture Size (Aspect Ratio) On Your LED TV
How to adjust your TV's aspect ratio to eliminate bars on the sides of the screen, stretched, or zoomed images
Setup: How To Auto Program Your LED TV Channels From A Cable Signal (2011-2012)
Scanning for channels from a cable signal
Feature: How To Run a Self-Diagnosis On Your TV (2010 - 2012 Models)
How To Run a Self-Diagnosis on your TV (2010 - 2012 Models)
Connect: How To Connect A Cable Line To Your TV And Have The TV Memorize Channels (2011 - 2012)
Connecting a coax cable line and memorize channels from you cable provider
Maintenance: How To Update Your Televisions Firmware (Software) Through The USB 2.0 Port (2009 -2012)
Instructions on updating the Firmware on yuor LED TV Through The Service Port (UNxxB - UNxxE)
Operation: How To Reset The Picture Or Audio Settings On Your LED TV To The Default Settings? (2011 -2012)
Instructions on how to reset the TV picture or audio setting back to defaults without reseting all TVs settings back to factory defaults
Operation: How To Check The Software / Firmware Version On Your LED TV (2011 - 2012)
How to find out the software / firmware version currently on your TV. (UNxxD ~ UNxxE)
Setup: How To Label The Inputs On Your TV (2011-2012)
A step-by-step guide on labeling your inputs.
Operation: How To Perform A Factory Reset On 2009 Through 2011 Model LED TVs (UN**B ~ UN**D)
A step-by-step guide for returning your TV to the factory defaults (UN**B ~ UN**D)
Operation: How To Label Your Inputs (2011 - 2012)
Instructions on how to label your TVs inputs (2011 - 2012 Model TVs)
Which Samsung TVs Have An ATSC (Digital) Tuner?
All TVs made from 2007 through current models include an ATSC tuners. Legacy Models Of the 2006 models, all Samsung HL-S series DLP TVs, all LN-S series LCD TVs ending with a D (for example, LN-S3269D), all SP-S and HP-S series Plasma TVs, and all TX-S series SlimFit TVs have a built-in ATSC
What Is The White Balance Setting?
White balance is an adjustment to remove unrealistic color casts. With this option you can fine tune the picture so objects that should be white are rendered white on your scren. This option is more of a fine tuning option then the Color tone option. In this setting you will be able to adjsut
Why Can't I Select Game Mode?
Depending on your TV, Game mode might not be available for all input sources. For example: On the HL-S5078, 5678, 6178, or 7178, Game mode was only available for AV1, AV2, AV3, S-Video1, S-Video2, S-Video3, Component1 and Component2, but not HDMI or DVI. To find out which sources Game mode is
What Is xvYCC?
xvYCC (Extended-gamut YCC) is a new color space (color range) standard for televisions, computer monitors, digital camcorders and cameras, etc. xvYCC supports up to 1.8 times more colors than the current standard. Starting in 2007 a few Samsung LCD, DLP, and Plasma TVs are capable of