TV Will Not Power On
When troubleshooting a no power situation with your TV the first thing you want to check is the status of the standby light on the TV. The Standby light will appear in the lower right corner of the TV Standby Light Off Standby Light On Click below on the statement that
How To Perform A Self Diagnosis
To perform a Self Diagnosis test, follow these steps: Turn the TV on. Press MENU on the TV remote, or on the TV itself. Use the or arrow button on the remote to select the Support section of the menu, and then press ENTER. 2011-2012 Menu 2009-2010 Menu Note: In some
The TV Is Not Parallel With The Stand
The most common reason for the TV and stand not to be in line is because the stand can swivel 20° in each direction. When the stand is first assembled sometimes the swivel mechanism can be stiff. To allign the stand an base you will need the assistance of another person. Have one person hold
Streaming Media ?
The DLNA / Allshare feature allows you to stream media from different DLNA certified devices to your TV. This integration of different devices makes sharing and accessing your content easier and more enjoyable. For example: If you have setup your computer to share media with your TV you can
Important: Before you unbox your TV make sure you have all the tools you will need and the space cleared where the TV will be put after assembly. For most TV unboxing and setup you will need something to cut the tape with and a Phillips head screw driver. Cut open the tape on one side of the
Installing The Stand
Tip: These instructions are general stand installation instructions. For model specific instructions please check your user manual. To attach the stand to your TV, follow the steps below: Note: To remove the stand, follow the steps in reverse order Attach the top part of the stand assembly
The Melody Plays When The TV Is Turned On, But Not When Turned Off
The Melody does not play when you turn the TV off for one of the following reasons: The Internal Mute is turned on The Volume is turned all of the way down or muted. To determine which troubleshooting path to take, turn the TV on, and then press [Volume +] on the TV remote. You will see
TV Will Not Power Off
Cyber If your TV is on but will not power off when you press the power button, you could be having an issue with your remote control or a faulty circuit inside your TV. To determine the source of your problem, follow these steps: Power the TV on if it is off. Unplug the TV from the wall
Display: (UN**D ~ UN**E) How To Change The Picture Size (Aspect Ratio) On Your LED TV
How to adjust your TV's aspect ratio to eliminate bars on the sides of the screen, stretched, or zoomed images
Setup: How To Auto Program Your LED TV Channels From A Cable Signal (2011-2012)
Scanning for channels from a cable signal
Feature: How To Run a Self-Diagnosis On Your TV (2010 - 2012 Models)
How To Run a Self-Diagnosis on your TV (2010 - 2012 Models)
Connect: How To Connect A Cable Line To Your TV And Have The TV Memorize Channels (2011 - 2012)
Connecting a coax cable line and memorize channels from you cable provider
Maintenance: How To Update Your Televisions Firmware (Software) Through The USB 2.0 Port (2009 -2012)
Instructions on updating the Firmware on yuor LED TV Through The Service Port (UNxxB - UNxxE)
Operation: How To Reset The Picture Or Audio Settings On Your LED TV To The Default Settings? (2011 -2012)
Instructions on how to reset the TV picture or audio setting back to defaults without reseting all TVs settings back to factory defaults
Operation: How To Check The Software / Firmware Version On Your LED TV (2011 - 2012)
How to find out the software / firmware version currently on your TV. (UNxxD ~ UNxxE)
Setup: How To Label The Inputs On Your TV (2011-2012)
A step-by-step guide on labeling your inputs.
Feature: How To Use Game Mode On Your LED TV (2011 - 2012 UNxxD - UNxxE)
A step-by-step guide on how to use the game mode feature.
Operation: How To Perform A Factory Reset On 2009 Through 2011 Model LED TVs (UN**B ~ UN**D)
A step-by-step guide for returning your TV to the factory defaults (UN**B ~ UN**D)
Operation: How To Label Your Inputs (2011 - 2012)
Instructions on how to label your TVs inputs (2011 - 2012 Model TVs)
What Is CMR (Clear Motion Rate)?
Clear Motion Rate (CMR) is a specification that was developed by Samsung to accurately measure how well a Samsung TV can depict fast-moving images and to help simplify comparing different Samsung TVs. CMR offers a more complete measure by calculating 3 factors: frame refresh rate, image
Why Can't I Turn Closed Captions On?
Closed Captioning Function Accessible Inaccessible If the closed captioning feature is greyed out on your TV this means you are on a source that does not carry the CC signal. Selected Source Carries CC signal Connection Coax Yes AV Yes
Where Can I Get The Samsung Link Software?
The Samsung Link software is used to stream content (photos, music, videos) from compatible devices For sign-up (using your Samsung account), software, and how-to guides on the Samsung Link software visit httplink.samsung.com/ PC Requirements: You can register any PC with Samsung Link
What Is Movie Mode?
Movie Mode is one of the automatic picture settings that are preset at the factory. When you select Movie Mode, your TV displays a natural image without picture enhancements that reproduces the color tone, brightness, and other visual features of a movie with the greatest fidelity. You can
Why Does My TV Make A Popping Or Cracking Noise After I Turn It Off?
The popping or cracking noises you hear after you turn off your TV are caused by different parts inside the TV contracting as they cool. It's caused by the thermal expansion the metal chassis of the TV goes through during the warm-up phase. These sounds are normal, and happen in a variety of