TV Will Not Power On
When troubleshooting a no power situation with your TV the first thing you want to check is the status of the standby light on the TV. The Standby light will appear in the lower right corner of the TV Standby Light Off Standby Light On Click below on the statement that
How To Perform A Self Diagnosis
To perform a Self Diagnosis test, follow these steps: Turn the TV on. Press MENU on the TV remote, or on the TV itself. Use the or arrow button on the remote to select the Support section of the menu, and then press ENTER. 2011-2012 Menu 2009-2010 Menu Note: In some
Dolby Is Not Available (Grayed Out) Even Though I Have A Dolby Digital Source
The SPDIF Output allows you to select the audio format that you would like to output the sound from your TV, PCM or Dolby Digital. However, there are restrictions on when the Dolby Digital signal is allowed to be selected. The Dolby Digital Audio format is only available to be selected when
The Melody Plays When The TV Is Turned On, But Not When Turned Off
The Melody does not play when you turn the TV off for one of the following reasons: The Internal Mute is turned on The Volume is turned all of the way down or muted. To determine which troubleshooting path to take, turn the TV on, and then press [Volume +] on the TV remote. You will see
The Closed Captioning Feature Is Greyed Out (Cannot Be Selected)
If the closed captioning feature is greyed out on your TV this means you are on a source that does not carry the CC signal. Selected Source Carries CC signal Connection Coax Yes AV Yes Component No HDMI No The only two inputs that
TV Will Not Power Off
Cyber If your TV is on but will not power off when you press the power button, you could be having an issue with your remote control or a faulty circuit inside your TV. To determine the source of your problem, follow these steps: Power the TV on if it is off. Unplug the TV from the wall
Display: (UN**D ~ UN**E) How To Change The Picture Size (Aspect Ratio) On Your LED TV
How to adjust your TV's aspect ratio to eliminate bars on the sides of the screen, stretched, or zoomed images
Setup: How To Auto Program Your LED TV Channels From A Cable Signal (2011-2012)
Scanning for channels from a cable signal
Connect: How To Connect Your LED TV To A Home Theater System (Analog) (2011-2012 UN**D - UN**E)
Connecting your TV to a Home Theater System using an analog connection (2011-2012 UN**D - UN**E)
Operation: How To Perform A Factory Reset On A 2012 Model LED (UN**E)
Instructions on how to return your 2012 TV back to factory defaults (UN**E)
Feature: How To Run a Self-Diagnosis On Your TV (2010 - 2012 Models)
How To Run a Self-Diagnosis on your TV (2010 - 2012 Models)
Connect: How To Connect A Cable Line To Your TV And Have The TV Memorize Channels (2011 - 2012)
Connecting a coax cable line and memorize channels from you cable provider
Maintenance: How To Update Your Televisions Firmware (Software) Through The USB 2.0 Port (2009 -2012)
Instructions on updating the Firmware on yuor LED TV Through The Service Port (UNxxB - UNxxE)
Operation: How To Reset The Picture Or Audio Settings On Your LED TV To The Default Settings? (2011 -2012)
Instructions on how to reset the TV picture or audio setting back to defaults without reseting all TVs settings back to factory defaults
Operation: How To Check The Software / Firmware Version On Your LED TV (2011 - 2012)
How to find out the software / firmware version currently on your TV. (UNxxD ~ UNxxE)
Feature: How To Use Game Mode On Your LED TV (2011 - 2012 UNxxD - UNxxE)
A step-by-step guide on how to use the game mode feature.
Operation: How To Label Your Inputs (2011 - 2012)
Instructions on how to label your TVs inputs (2011 - 2012 Model TVs)
What Is CMR (Clear Motion Rate)?
Clear Motion Rate (CMR) is a specification that was developed by Samsung to accurately measure how well a Samsung TV can depict fast-moving images and to help simplify comparing different Samsung TVs. CMR offers a more complete measure by calculating 3 factors: frame refresh rate, image
Why Can't I Turn Closed Captions On?
Closed Captioning Function Accessible Inaccessible If the closed captioning feature is greyed out on your TV this means you are on a source that does not carry the CC signal. Selected Source Carries CC signal Connection Coax Yes AV Yes
Where Can I Get The Samsung Link Software?
The Samsung Link software is used to stream content (photos, music, videos) from compatible devices For sign-up (using your Samsung account), software, and how-to guides on the Samsung Link software visit httplink.samsung.com/ PC Requirements: You can register any PC with Samsung Link
What Is Movie Mode?
Movie Mode is one of the automatic picture settings that are preset at the factory. When you select Movie Mode, your TV displays a natural image without picture enhancements that reproduces the color tone, brightness, and other visual features of a movie with the greatest fidelity. You can
Why Does My TV Make A Popping Or Cracking Noise After I Turn It Off?
The popping or cracking noises you hear after you turn off your TV are caused by different parts inside the TV contracting as they cool. It's caused by the thermal expansion the metal chassis of the TV goes through during the warm-up phase. These sounds are normal, and happen in a variety of
Setup: The Computer Image Is Cropped / Bigger / Cut Off On The TV Screen
A common complaint when connecting a computer to the TV is the screen size is not correct or that image is cropped. This is caused because the TV's scaling is set for standard HDMI input. To resolve these image issue you simply need to rename the input PC or PC DVI. Once renamed the TV will
How To Manually Power On And Off The TV (2012)
2012 Television now use a Jog control instead of touch buttons to control the TV without the remote control. This control is located on the rear or bottom right side of the TV and will feel like a little joystick. Powering The TV On To power the TV on push in on the Jog. Powering Off