How do I run a Calibration mode on my washing machine?

Last Update date : 2017.09.11

Samsung Washing Machines detect laundry load automatically. For more accurate weight detection, run Calibration Mode after installation to calibrate the weight sensors in your washer which allows the machine to be more energy efficient.

 

Step 1: Remove laundry or any contents in the machine and then Power On the machine.

 

1 

 


Step 2: Press and hold the Delay End and Spin buttons simultaneously, and then press the Power button. This will activate Calibration Mode, the machine will display Cb.

 

2  

 


Step 3: Press the Start/Pause button to activate Calibration Mode. The drum will rotate for approximately 4 minutes.

 

 

Step 4: When Calibration Mode is finished, End will appear on the display and the machine will automatically turn Off. The washing machine has now been calibrated and is ready for use.

 

4

 

 

If the problem still persists then please contact Samsung Customer Care for a resolution using one of the options below.

Contents Satisfaction Survey

Q1. Is this content helpful?

Q2. How satisfied were you with this content?

Q3. Tell us what you think. What could we have done to answer your question better?

Need Service? Service Center Locations

Share this item

Close Share pop-up

Thank you!

We appreciate you filling in this questionnaire and thank you for helping us improve the Samsung.com website.

ok