How to apply Galaxy Z Flip 5 screen protector

1. What's in the box

    Protection film x2

    Applicator

    Microfibre cleaner

    Dust remover

    Squeegee

    Installation guide

2. Applicator

    Unfold your Galaxy Z Flip5

    Peel off all the stickers

    On a flat surface, rotate it until the corner matches with the device

3. Microfibre cleaner

    Wipe it thoroughly

4. Dust remover

    Dab off any remaining dust

5. Attach

    Now, let's attach it!

    It's okay to make a mistake as you have two!

    Peel off the label marked 1 to expose the adhesive

    Flip the film over so it matches with the applicator holes

    Tip 1. When aligning keep the film off the surface

    Use the camera flash to line up the film

    Press throughout the adhesive part with your finger

6. Squeegee time!

    Position the squeegee over the centre, cut line

    Lift the film up so the blue tab comes off and press the fan-shaped area forward

    Turn it upside down

    Detach from each hole one by one

    Remove the applicator

    Place the squeegee in the middle where the film is already attached

    Tip 2. Hold the device firmly while pressing the squeegee forward

    Press firmly to secure adhesion

    Slide the squeegee evenly towards the edge of the screen

    Flip the phone shut

    Remove the label marked 2

    Rub the edges firmly to ensure no gaps remain

    All done!