How to connect the water supply hose in Samsung Top Load Washing Machine?

a)  Remove the adaptor from the water supply hose.

b)  Using a “+” type screwdriver, loosen the screws on the adaptor.

c) Connect adaptor to the water tap by firmly tightening the screws.Then turn part (b), following the arrow, and put (a) and (b) together.

d) Connect the water supply hose to the adaptor. Pull down part (c) of the water supply hose. When part (c) is released, the hose is automatically connected to the adaptor.

e) Connect the other end of the water supply hose to the inlet water valve at the back of the washer. Screw the hose clockwise, all the way in.

Note: If the water tap is a screw type, connect a water supply hose that fits to the tap as shown