How do I run a Calibration mode on my washing machine?

Last Update Date : Dec 26. 2017

* Please Note, this section is designed to give you basic product troubleshooting information, also refer to your user manual for more information.

Selective models of Samsung Washing Machines detect laundry load weights automatically. 


For more accurate weight detection, run Calibration Mode after installation to calibrate the weight sensors in your washer which allows the machine to be more energy efficient.

1 Remove laundry or any contents in the machine and then Power On the machine.
How do I run a Calibration mode on my washing machine?
2 Press and hold the Delay End and Spin buttons simultaneously, and then press the Power button. This will activate Calibration Mode, the machine will display Cb.
How do I run a Calibration mode on my washing machine?
3 Press the Start/Pause button to activate Calibration Mode. The drum will rotate for approximately 4 minutes.
4 When Calibration Mode is finished, End will appear on the display and the machine will automatically turn Off. The washing machine has now been calibrated and is ready for use.
How do I run a Calibration mode on my washing machine?

If the problem still persists then please contact Samsung Customer Care for a resolution using one of the options below.

Thank you for your feedback!

Need more help? Contact Us.

Online

Monday to Sunday
24 hours / 7 days a week

Email

We'll respond within 24 hours of your request.

Email Escalation

We endeavour to respond within 24 hours.

Call

0800 726 786For all products

0800 SAMSUNG
24 hours / 7 days a week

0800 6 726 786For Smart Mobile Devices

0800 M SAMSUNG
24 hours / 7 days a week

* For any printer related enquiries please visit the HP website .

Face-to-face support

Find a Service Centre

Find out more about how you can get face-to-face help.

Contact Us