How to use HUB in Extender mode.

Last Update date : Nov 23. 2020

Please Note: The information on this page is for New Zealand products only. Sequences or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.

Case: Lack of installation guide for the users who purchased two HUBs

 

Solution

 1. WiFi Channel Selection function of the HUB  

- An M7 Wireless Speaker and a HUB may not pair successfully if the M7 and HUB are too far apart or are on different floors.

In such cases, you can link two HUBs together by setting the second HUB to Repeater mode. The additional HUB amplifies the signal and lets you pair the M7 to the closest HUB.

 

1 Set the HUB that is connected to the wireless router to Pairing mode by pressing its SPK ADD button for 1 second.
2 Plug in the new HUB you are using as an extender and then press its SPK ADD button for 10 seconds.
3 The newly added HUB's LED indicators turn off and on, and it switches to Repeater mode.
4 Once the connection between the two HUBs has been established, the added HUB's indicator stops blinking.
example

Warnings

  • If your smart device is not connected to the wireless router with a Wi-Fi connection, the M7 will not appear on the Samsung Multiroom app.   
  • Place the HUB that is in Repeater mode in an appropriate location between the M7 and the HUB that is connected to the wireless router. 
  • You can set only one HUB to Repeater mode.
  • Only ONE(1) HUB is recommended to be used in Repeater Mode. 

You can download the user manual from our Manuals & Downloads page. For all other queries or further technical assistance, please call Samsung Customer Care on 0800 726 786 or Live Chat with our Technical Team online, services are open 24 hours, 7 days.

 

 

           

Please click the submit button below to share your feedback with us. Thank you for your participation.

Thank you for your feedback!