Use the mop on your Samsung POWERbot-S

Last Update date : Aug 18. 2023
A Samsung POWERbot-S is a vacuum is being used in a living room

Although your Samsung POWERbot-S is a vacuum, it also functions as a mop for hardwood and tile floors! When you’d like to use the vacuum as a mop, simply fill its water tank and attach the mop components.

A Samsung POWERbot-S is a vacuum

The mop function on your Samsung POWERbot-S uses three main components: the water tank, the mop holder, and the mop cloth. Before starting, make sure the mop cloth is attached to the mop holder.

1 Press the Release button on the water tank and pull the tank to remove it from the vacuum.
The water tank is being removed from a Samsung POWERbot-S is a vacuum
2 Open the water tank’s lid and fill the tank with water without exceeding the MAX line. Then, close the lid.
An arrow is pointing out the lid of the water tank from a Samsung POWERbot-S is a vacuum

Note: Use only clean water when filling the tank. Do not use hot water or detergent, as this may clog the tank and vacuum.

3 Attach the mop holder to the water tank.
The mop holder is being attached to the water tank of a Samsung POWERbot-S is a vacuum
4 Reinsert the water tank. You will hear a clicking sound when the tank has been properly inserted.
The water tank is being reinserted into a Samsung POWERbot-S is a vacuum
5 Press the Power button on the vacuum to begin mopping. You can prevent the vacuum from reaching carpeted areas by setting up a virtual wall in the SmartThings app.
Someone is pressing the Power button of the Samsung POWERbot-S is a vacuum

Notes:

  • Clean the mop cloth after use.
  • Remove the mop holder when the vacuum is charging.
  • To adjust the water flow, please refer to the SmartThings app.

Thank you for your feedback!

RC01_Static Content