How to clean your Samsung dishwasher?

Last Update date : 2025-08-20

Since your dishwasher's job is to clean, it's easy to forget it has its own cleaning needs. But proper cleaning is an important part of dishwasher maintenance. Not only does it improve performance, it reduces unnecessary repairs over the dishwasher's lifetime.

Check out our tips for day-to-day, routine wipe-downs, as well as how to tackle a deep cleaning whenever your dishwasher needs it.

dishwasher

Caution: Do not use bleach in a dishwasher with a stainless steel interior (which most of our dishwashers have). This may damage or discolor the interior.

A routine clean should be done regularly and whenever you notice a buildup of debris, stains, or other marks on or inside your dishwasher. Here are some tips for cleaning the outside and inside of your dishwasher.

  • When performing a routine clean, gently wipe down the outside of the dishwasher and control panel with a soft, damp, cloth to remove any stains.
  • If your dishwasher came with a cutlery pad, turn it over after each use to keep it clean. You can remove white spots and odors from the pad by running the Self Clean cycle. Make sure the dishwasher is empty during this cycle and do not add detergent.
  • To clean the interior, place an 8 ounce cup of distilled white vinegar upright in the lower basket, and then run a Sanitize cycle by selecting the Sanitize button. This cycle will reach 163 degrees during the final rinse cycle for optimum sanitization.

Note: The Sanitize feature is not available when running Delicate and Rinse Only cycles. The Sanitize light will blink until it reaches the necessary temperature. If it keeps blinking, the water temperature requirements for the feature were not met, and you should raise the temperature of the water supply.

Before deep cleaning your dishwasher, you may want to perform a routine cleaning first by following the suggestions in the previous section.

  • For a deep clean, remove the nozzles and filter. They should be soaked overnight in distilled white vinegar.
  • Distilled white vinegar will remove mineral deposits and grime that have accumulated or are causing an odor.
filter and blade of the dishwasher

Many dishwashers have a removable filter to make cleaning it easier. If your model has a removable filter, see the following steps. If these steps do not match your model, refer to your user manual for the correct steps.

Note: If your manual does not provide steps, then your model does not have a removable filter. In this case, just clean the bottom of the dishwasher tub everywhere you can reach.

It is recommended that you clean the filter often. This will prevent clogged filter errors, such as 1E (which may look like IE or lE), indicating that water is not going through the filter.

inner part of the dishwasher

Here's what to do if you have a removable filter:

  1. Remove the lower rack.

  2. Rotate the filter handle counterclockwise to unfasten the filter compartment door.

  3. Remove the filter door, and then remove the filter that is underneath.

  4. Wipe away dirt or other remains from the filter and the filter door. Allow the filter and filter door to soak in distilled white vinegar overnight, and then rinse them under running water.

  5. Reinstall the filter, and then the filter door.

  6. Rotate the filter door handle clockwise to lock the filter door.

Nozzles should be cleaned regularly to ensure they can rotate smoothly and spray water through each of their holes. If any of the nozzles' holes are clogged, this reduces cleaning performance and can leave food particles on dishes. See the following steps for an example of how to clean them. If these steps do not match your model, refer to your user manual for the correct steps.

inner part of the dishwasher
  1. Remove any racks that are blocking access to the nozzle.

  2. Unfasten the nozzle cap by turning it counterclockwise, and then remove the upper nozzle. Some nozzles don't have a nozzle cap and can just be pulled off.

  3. Clean the nozzle thoroughly using a small brush (such as a dishwashing brush or an old toothbrush). Allow the nozzle to soak overnight in distilled white vinegar, and then rinse it by running water through the nozzle. Make sure water can easily pass through all of the nozzle's holes.
  4. Reinsert the nozzle, and then fasten the nozzle cap (if it has one) by turning the cap clockwise. Afterwards, check whether the nozzle is attached correctly by rotating it.

On some dishwasher models, the drain pump can be reached when the drain filter is removed. If debris is caught in the drain pump, it can cause the dishwasher to make a noise or not drain properly. 

It is rare that you need to access the drain pump, but if it is accessible, the user manual for your dishwasher includes instructions for cleaning it.

Models with a fine filter

Some dishwashers come with a fine filter that helps provide extra protection. You will need to remove the filter insert and the fine filter and clean them both.

1 Turn off the dishwasher, and then open the door.
2 Rotate the filter counterclockwise to unfasten it, and then detach the filter.
Rotate the filter counterclockwise to unfasten it
3 Remove the filter by lifting it upward.
Remove the filter by lifting it upward
4 Remove dirt or other debris from the filter, and then rinse it in running water. You can use a toothbrush to gently scrub away debris.
5 Reassemble the filter in the reverse order, starting with the filter insert. Then, rotate it clockwise until it is locked.
Reassemble the filter in the reverse order
Models with a micro filter
1 Turn off the dishwasher, and then open the door. Remove the lower rack.
2 Turn the filter handle counterclockwise to unlock the filter cover, and then remove the filter cover. Next, remove the cylindrical micro filter from underneath.
Turn the filter handle counterclockwise to unlock the filter cover
3 Remove dirt and impurities from the micro filter and the filter cover. Rinse the micro filter and filter cover in running water. You can use a toothbrush to gently scrub away debris.
4 Thoroughly dry both items before proceeding to the next step.
5 Reinsert the filter and then reinsert the filter cover. Turn the filter handle clockwise to lock it.
Reinsert the filter and then reinsert the filter cover
Models without a removable filter
  1. Since the filter cannot be removed, thoroughly wipe down the dishwasher's interior everywhere that can be reached, including the drain area. Use a wet dishcloth to wipe away food particles or debris.
  2. Next, fill the detergent dispenser with dish detergent, and then run the dishwasher while it is empty using a Normal cycle (or Quick cycle if it is available).
  3. As long as the dishwasher is able to drain, this process will help clear away any remaining debris.

Note: For further assistance or questions, please Contact us.

Thank you for your feedback!