Step 1.
1) Press the side button to open the brush cover.
2) Turn to rotate the brush cover to take out the brush.

Step 2.
1) Gently remove the brush cover.
2) Remove tangled hair on the brush.
3) Remove any foreign matter still on the brush. You can use a wet tissue or a dry cloth for the removal.

Step 3.
Slowly insert the brush until the unlock icon reaches the end.

Step 4.
Turn the cover to close the brush back in place and check that the lock icon is on.

Step 1.
Press the button to eject the brush.

Step 2.
Gently take the brush out completely.

Step 3.
Remove foreign matter. If the foreign matter does not come off easily, use scissors to remove it. Be careful not to cut the brush.

Step 4.
Push the brush back into place.

Step 5.
Turn the brush to the back side.

Step 6.
Eject the spin brush from the Dual Brush.

Step 7.
Take the brush out completely and carefully wipe away any dirt and debris with a wet tissue or dry cloth.

Step 8.
Push the slim brush back into the vacuum.

Step 1.
Remove the cloth of the wet brush (multi-use wet pads).

Step 2.
Soak the wet pads in water and soap.

Step 3.
Wring out the excess water and allow the pads to dry before placing them back onto the spin disks.

Step 4.
Once they are completely dry, you may reattach the pads to the Wet Brush. When attaching the wet pads, make sure each pad is in the center of the spin disk it is attached to.