How to use your Samsung AirDresser?

Last Update date : Sep 22. 2020

After you have installed your Samsung AirDresser, follow the instructions below for details and usage guidelines on how to use a cycle. Taking care of your clothes shouldn't be a hassle. 

AirDresser
Usage Guidelines

Please take note of this usage guidelines when using your AirDresser.

 

Before use
• This AirDresser cannot be used to clean items. For best results, wash and dry all items before using the product.
• We recommend washing items with strong odors or items that have been stored for a long time.
• Separate items by odor strength.
• Check all clothing or item labels before using the product.
• Before placing the clothing into the product, make sure to empty all pockets.
• Do not use the product as a storage closet.
• The product may not remove pet hair.

 

During use
• Make sure items are not touching the bottom of the product. If necessary, use the shelf to stop items that are hung from touching the bottom of the product.
• Hissing noises may occur during a steam process.
• If you need to stop a cycle before it will finish, make sure to run the Dry cycle.
• Operating time depends on the environment and type of items.
• If used consecutively, the product may display a different operating time than what will occur.
• Do not open the door while the product is operating.

 

After use
• The amount of wrinkles removed may vary depending on the fabric type.
• Remove items immediately after a cycle has finished. If you cannot remove items immediately, use Delay End or Keep Fresh.
• When removing items, hold both the items and the hanger.

Using a cycle

Step1: Make sure the Refill Tank (A) is filled with water. If the tank is not filled with water, the AirDresser will not operate and you will receive an error message.

Step2: Make sure the lint filter (B) is clean.

1 Make sure the Refill Tank (A) is filled with water. If the tank is not filled with water, the AirDresser will not operate and you will receive an error message.
refill-tank
2 Make sure the lint filter (B) is clean.
lint-filter
3 Add your items into the AirDresser. as instructed in Using the accessories section.
4 Tap Power button icon Power
5 Select a cycle.
  • Tap Normal, Delicates, Quick or Sanitize.
  • For Dry cycles, tap Dry repeatedly to select a desired dry cycle.
  • For Special cycles, tap Special repeatedly to select a desired special cycle.
  • operating-sequence
    6 Select options if necessary.
  • Silent icon Silent, Child Lock icon Child Lock, Delay icon Delay End, Keep Fresh icon Keep Fresh.
  • 7 Tap and hold START/PAUSE for 3 seconds.

    Below is the list of accessories of the AirDresser to help you understand where some of these bits and pieces go.

    Shelf
    Drip Tray
    Air Hanger
    Weight Kit
    Shelf
    Drip Tray
    Air Hanger
    Regular Hanger Kit
    Cleaning Cloth
    User Manual
    Anti-tip Strap
    Regular Hanger Kit
    Cleaning Cloth
    User Manual
    Anti-tip Strap
    Screw (for Anti-tip Strap)
    Anchor Screw (for Anti-tip Strap)
    Rear Levelling Feet
    Screw (for Anti-tip Strap
    Anchor Screw (for Anti-tip-Strap)
    Rear Levelling Feet
    How to use Air hangers

    Use the provided Air hangers for items such as jackets, sportscoats, and blazers. 

    air hanger

    To use the Air hangers 

    Step1: Hang items on hangers in the same direction.

    • To prevent items from falling off the hangers, make sure to button all buttons and zip all zippers.
    • Make sure all items are hung flatly. Make sure the hanger clips do not protrude outward.

    Step2: Slide the hangers into the air holes until you hear a clicking sound.

    • Make sure hangers are facing the same direction.
    • If the Air hangers are not properly inserted into the air hole, vibrations and noises may occur.

    Please Note:
    • Make sure the interior and exterior of the hangers are clean and free of foreign matter.
    • Do not use hangers for knits, wools, lingerie.
    • The maximum lengths of items must be 110 cm for tops and 100 cm for bottoms.
    • Depending on the type or size of the fabric, unwanted wrinkles may form on the neck of your clothing.

    • For best results, avoid hanging longer items from the middle hole.

    How to use Regular hanger kit

    You can use the regular hanger kit to use regular hangers to hang your items. However, for best results, we recommend using the Air hangers. To use the regular hanger kit.

     

    To use the regular hanger kit 

    Step1: Hang items on hangers in the same direction.

    • To prevent items from falling off the hangers, make sure to button all buttons and zip all zippers.
    • Make sure all items are hung flatly. Make sure the hanger clips do not protrude outward.

    Step2: Slide the regular-hanger kit into the air holes until you hear a clicking sound, and then hang the hangers on the regular-hanger kit.

    • Make sure hangers are facing the same direction.
    • If the regular-hanger kit is not properly inserted into the air hole, vibrations and noises may occur.
    air hanger regular

    Please Note: 

    • Use hangers that will not be deformed by heat.
    • Make sure the interior and exterior of the hangers are clean and free of foreign matter.
    • Do not use plastic/silicone/wooden hanger and hangers with adhesive.
    • Do not use hangers from laundry that may become rusty.

    •  For best results, avoid hanging longer items from the middle hole.

    How to use Weight kit

    • Make sure the trousers or weight kit does not touch the bottom of the product.
    • The maximum length of trousers must be 100 cm

    To use the weight kit
    Step1: Clip the bottom of the trousers to the Air hanger.
    Step2: Clip the other end of the trousers to the weight kit.
    Step3: Slide the Air hanger into the air holes until you hear a clicking sound.

    Weight kit
    How to use Shelf

    Use the provided shelf for items that cannot be used with hangers. 

    To use the shelf
    Step1: On the side walls, press the bottom part of the shelf holders to turn them out.

    Shelf holder

    Step2: Place the shelf on the shelf holders. Make sure the grooves on the shelf are firmly sitting on the holder. A gap between the sides of shelf and the
    side walls is normal.

    Shelf holder

    Store the shelf on the door when not in use. Place the shelf on the bottom holder, and then hang it on the top holders.

    bottom holder

    Thank you for your feedback!

    RC01_Static Content