How to fix water leakage at the Y Connector of Samsung Washing Machine?

Last Update date : Oct 20. 2020

If water is leaking at the Y Connector, follow these steps:

1 Turn off the cold water source valve
2 Remove both water lines from the Y connector by turning them counter clockwise
3 Then unscrew the Y connector from the back of the Washing Machine by turning the counter clockwise
Water leaks at Y connector
4 Inspect the rubber seal for proper placement. If the rubber seal is not positioned properly, it will look like the image on the left and cause a leak
5 Remove and reinstall the seal. When the seal is properly installed, it will look like the image on the right
Water leaks at Y connector
Water leaks at Y connector
6 Reinstall the Y Connector on the cold water inlet of the Washing Machine

• Tighten the Y Connector hand tight, then use a plier to tighten an additional 1/4 turn
• Reinstall both water lines to the Y Connector and turn the cold water source valve counter clockwise to the full open position. After which, check for leaks

Thank you for your feedback!

RC01_Static Content