Q-Series Soundbar HW-Q610F 3.1.2ch with subwoofer (2025)
Gallery popup
Skannaa tämä QR-koodi puhelimellasi ja aseta esine haluttuun tilaan
Huippuominaisuudet
Ominaisuudet
Äänikokemus, joka on aito aina ytimeen saakka
Tärkeimmät ominaisuudet yhdellä silmäyksellä
Todellinen 3.1.2ch-ääni
Mukaansatempaava ääni ylhäältä 2 ylöspäin suuntautuvalla kanavalla
Soundbarissa on 3 pääkanavaa, 1 subwoofer ja 2 ylöspäin suuntautuvaa kanavaa, joten se luo täydellisen ääniympäristön, joka tarjoaa kiehtovan viihdekokemuksen.
* 3.1.2ch (3 etu- ja surround-kanavaa, 1 subwoofer-kanava ja 2 ylöspäin suuntautuvaa kanavaa). Mukana langaton subwoofer.
Dolby Atmos / DTS Virtual:X
Elokuvamainen 3D-ääni, joka ympäröi sinua
Koe mukaansatempaava ääni, jonka objektipoihjaiset ääniformaatit, kuten Dolby Atmos ja DTS Virtual:X, tarjoavat.
Q-Symphony
TV ja Soundbar orkestroituna harmonisesti
Q-Symphonyn avulla tekoäly erottaa äänen ja taustaäänet toisistaan ja toistaa ne sopivalla kanavalla. Nyt saat kirkkaamman dialogin ja upeamman 3D-surround-äänen, joka toistuu television kaiuttimien ja soundbarin kautta akustisessa synergiassa.
* Q-Symphony edellyttää yhteensopivaa 2022-2025 Samsung TV:tä (BU8000 ja uudempi 2022-malleissa, CU7000 ja uudempi 2023-malleissa, DU7000 ja uudempi 2024-malleissa, U8000F ja uudempi 2025-malleissa ja 2022-2025 The Frame -malleissa).
Mukautuva ääni
Jokaiselle kohtaukselle optimoitu ääni
Saat kuuntelukokemuksen, joka on optimoitu jokaista kohtausta varten. Soundbar tunnistaa katsomasi sisällön tyypin ja mukauttaa ääniasetukset automaattisesti tuottamaan selkeät ja yksityiskohtaiset äänet.
SpaceFit Sound Pro
Tilaan täydellisesti kalibroitu ääniNauti upeasta äänestä, joka on viritetty huoneeseesi. Soundbar analysoi tilan ja säätää äänen sen mukaan — jopa optimoimalla basson — jotta ääni olisi mahdollisimman selkeä ja mukaansatempaava.
* SpaceFit Sound Pro toimii vain tiettyjen vuosien 2021-2025 Samsung-televisioiden kanssa (Q7 ja sitä uudemmat mallit vuosille 2021-2024, Q8FA ja sitä uudemmat mallit vuosille 2025 ja The Frame 2021-2025).
Peli Pro-tila
Ole osa peliä dynaamisen äänen avullaSukella suoraan pelitoimintaan eloisalla 3D-äänellä. Soundbar säätää äänen automaattisesti, kun se havaitsee Samsung-televisioon liitetyn konsolin. Jos pelaat Samsung TV:n Gaming Hubin kautta, se optimoi äänen pelityypin mukaan.
* Samsung Gaming Hubin äänioptimointi voi vaihdella alueen ja TV-mallin mukaan.* Pelikonsoli myydään erikseen. Yhteensopivat laitteet voivat vaihdella.
Yhteensopiva langattoman Surround-äänen kanssa
Laajenna surround-ääntäsi ja hanki lisää ominaisuuksiaLangattoman takakaiutinsarjan avulla voit laajentaa soundbarin surround-äänijärjestelmäksi ja parantaa surround-kokemusta.
* Samsungin langaton takakaiutinsarja (SWA-9250S) myydään erikseen, ja se vaatii virtajohdot oikean ja vasemman takakaiuttimen liittämistä varten.
HDMI eARC
Saumattomasti toimitettu äänenlaatuSoundbar hyödyntää HDMI eARC -teknologiaa, joka mahdollistaa tasaisen äänentoiston televisiosta ja siihen liitetyistä laitteista. Nyt voit nauttia Dolby Atmoksen kaltaisista 3D-surround-ääniformaateista laadukkaasti.
* Edellyttää yhteensopivia televisioita, lähdelaitteita ja erikoissisältöä.
Bluetooth® TV-yhteys
Yhdistä Soundbar televisioon langattomastiOvatko kaapelit ja johdot asetusten tiellä? Yhdistä soundbar ja televisio yksinkertaisesti Bluetooth-yhteydellä ja nauti kaikesta suosikkisisällöstäsi langattomasti.
* Saatavilla Bluetooth-yhteensopivissa Samsung-televisioissa.Yksi kaukosäädin
Yksi kaukosäädin täydelliseen hallintaanSamsung TV:n kaukosäädin ei ole vain televisiota varten. Sen avulla voit hallita Soundbarin keskeisiä toimintoja, kuten virtaa, äänenvoimakkuutta ja äänitehosteita.
* Saatavilla Bluetooth-yhteensopivissa Samsung-televisioissa.Samsung Audio Lab
Ääni-innovaatioasiantuntijoiden suunnittelemaKalifornian audiolaboratoriossamme testatut ja viritetyt maailmanluokan äänitekniikan insinöörit käyttävät kehittyneitä akustisia tekniikoita tasapainoisen, huoneen täyttävän äänen aikaansaamiseksi.
*Kuvat on simuloitu havainnollistamistarkoituksiin. Kukin komponentti vaatii toimiakseen erillisen virtajohdon. Ulkonäköä ja muotoilua koskevat tiedot, jotka eivät vaikuta tuotteen suorituskykyyn, voivat muuttua ilman ennakkoilmoitusta.* Todellinen tuote voi poiketa näytetystä kuvasta. Katso tuotegalleriaamme.
Tekniset tiedot
-
Kanavien määrä
3.1.2
-
Myyntipaketin ulkomitat (L x K x S): Yksi pakkaus
1088 x 440 x 235 mm
-
Bruttopaino (yksi pakkaus)
11,3 kg
-
Virta
0.5W
-
Virrankulutus (Pääkaiutin)
34 W
-
Kanavien määrä
3.1.2
-
Elemettien määrä
9
-
Color
Titan Black
-
Center Speaker
Kyllä
-
Up-firing Speaker
Kyllä
-
Wireless Subwoofer Included
Kyllä
-
Dolby
Dolby ATMOS,(*Dolby ATMOS Music),Dolby TrueHD,Dolby Digital Plus,Dolby 5.1Ch
-
Voice Enhance Mode
Kyllä
-
Night Mode
Kyllä
-
SpaceFit Sound Pro
Kyllä (Works with TV)
-
Sound Modes
Surround Sound Expansion, Game Pro, Adaptive, DTS Virtual:X, Standard
-
LPCM
Multi channel
-
4K Video Pass
60Hz
-
HDR
HDR 10+
-
Dekooderimuoto
MP3,AAC,OGG,FLAC,WAV,AIFF
-
HDMI In
1
-
HDMI
1
-
HDMI ARC
Kyllä (eARC)
-
HDMI CEC
Kyllä
-
Optical In
1
-
Bluetooth
Kyllä
-
USB Music Playback
Kyllä
-
One Remote Control
Kyllä
-
Bluetooth Version
4.2
-
Q-Symphony
Kyllä
-
Tap Sound
Kyllä
-
Ulkomitat (Pääkaiutin) (L x K x S)
1030 x 57 x 105 mm
-
Ulkomitat (Subwoofer) ( L x K x S)
184 x 343 x 295 mm
-
Myyntipaketin ulkomitat (L x K x S): Yksi pakkaus
1088 x 440 x 235 mm
-
Nettopaino (Pääkaiutin)
3,9 kg
-
Nettopaino (Subwoofer)
5,2 kg
-
Bruttopaino (yksi pakkaus)
11,3 kg
-
Valmiustilan virrankulutus (Pääkaiutin)
0.5W
-
Valmiustilan virrankulutus (Subwoofer)
0.5W
-
Virrankulutus (Pääkaiutin)
34 W
-
Virrankulutus (Subwoofer)
40 W
-
Free Voltage -toiminto
Kyllä
-
Kaukosäädin
Kyllä
-
Seinäkiinnike
Kyllä
Arvostelut
Q-Series Soundbar HW-Q610F 3.1.2ch with subwoofer (2025)
Arvostelut kuvine ja videoineen
Suodattimet
Relevanttiuden perusteella lajiteltuna parhaat arvostelut näytetään ensimmäisenä. Näissä huomioidaan mm. se, kuinka monta tykkäystä arvostelu on saanut, kuinka uusi arvostelu on ja onko siinä kuvia tai muuta, jota lukijat arvostavat arvosteluita lukiessaan.
Suodattimet
914 Arvostelut
2026-10-27
2026-10-26
2026-10-26
2026-10-26
Houston Texas
2026-10-26
2026-10-26
2026-10-26
2026-10-26
Gaston, SC
2026-10-20
2026-10-20
Elizabethton TN
2026-10-17
SAUKVILLE WI
2026-10-16
2026-10-09
2026-10-08
2026-10-08
2026-10-04
Georgia
2026-09-28
2026-09-28
Delaware
2026-09-20
2026-09-20
Texas
2026-09-20
Altoona
2026-09-20
2026-09-19
Gummersbach
Samsung Service Team
Hallo, vielen Dank für dein positives Feedback. Wir freuen uns sehr zu lesen, dass du mit deiner Samsung Q-Serie Soundbar so zufrieden bist und sowohl die einfache Bedienung als auch die Soundqualität dich überzeugt haben. Wir wünschen dir weiterhin viel Freude damit und viele tolle Sounderlebnisse.
2026-09-19
Gummersbach
Samsung Service Team
Hallo, vielen Dank für das Lob. Darüber freuen wir uns sehr. Wir wünschen dir weiterhin viel Freude mit deiner Samsung Q‑Serie Soundbar.
2026-09-18
De Queen
2026-09-15
2026-09-15
Peoria, IL
2026-09-15
2026-09-14
HILLSBORO,Oregon
2026-09-14
Chanhassen MN
2026-09-14
2026-09-14
2026-09-14
2026-09-14
Pittsburgh Pennsylvania
Samsung Solutions
Hi Samiam12, Thank you for sharing your review of the HW-Q600F Soundbar. We value your feedback and will share it with our teams. There are two adjustments that can be made to maximize bass from the soundbar and subwoofer: 1. Using the WOOFER button on the remote, you can adjust the level between -6 to +6. To set the subwoofer volume level to 0, press the button in. 2. Adjust the bass control by pressing the TONE CONTROL button on the remote control, then select BASS to increase the level. You can adjust the volume between -6 to +6 by using the Up/Down buttons. For precise audio adjustments, you can use the 7-band frequency equalizer to optimize the sound for your room acoustics. I hope this helps. For further assistance with features, settings, adjustments, or functions please contact Samsung Customer Support. Just give us a call at 1-800-SAMSUNG (Ask for Soundbars), Mon – Fri 8 AM – 9 PM EST, Sat & Sun 8 AM – 6 PM EST. Our Live Chat agents are also available by clicking on the ‘Support’ link on our website. ~ Samsung Solutions
2026-09-14
Tampa,fl
2026-09-11
Peñasco NM
2026-09-09
NJ
2026-09-05
Buffalo
2026-09-04
Tzaneen, Limpopo
2026-09-04
Lusaka
2026-08-31
2026-08-28
Falling Waters, WV
Samsung Solutions
Hello Shep, We appreciate you taking a few moments to review the Samsung HW-Q600F Soundbar. We value your feedback and will share it with our teams. To connect your Samsung HW-Q600F Soundbar, Music Frame, and compatible Samsung TV using Q-Symphony, first connect the HW-Q600F to your TV using the HDMI eARC/ARC connection, which is the recommended method for the best audio performance. Next, use the SmartThings app to connect the Music Frame to the same Wi‑Fi network as your Samsung TV. The Q600F supports Q‑Symphony when paired with a compatible Samsung TV. Once both devices are connected, navigate to Settings > All Settings > Sound > Sound Output on your TV and select Q-Symphony Setup. From the list of available audio devices, choose the HW-Q600F Soundbar and the Music Frame, then follow the on-screen instructions and select Apply. The TV will then synchronize the TV speakers, soundbar, and Music Frame to create a more immersive audio experience. Q-Symphony 4.0 supports using one Music Frame together with a compatible Samsung soundbar on supported Samsung TVs. If you need more help, Samsung is here for you. Please call us at 1-800-SAMSUNG, Mon – Fri 8 AM – 9 PM EST, Sat & Sun 8 AM – 6 PM EST. Live Chat with an agent as well as manuals, software, creating a service ticket, and warranty info can be found at the ‘Support’ link on our Samsung website. ~ Samsung Solutions
2026-08-28
2026-08-24
RIO GRANDE CITY texas
2026-08-24
2026-08-24
2026-08-24
Nj
2026-08-24
Austin, TX
2026-08-24
Huntsville, AL, United States
2026-08-24
2026-08-24
Huntsville, AL
2026-08-24
Ma
2026-08-24
Samsung Solutions
Hello DOMINANCE23, Thank you for sharing your review of the HW-Q600F Soundbar. We value your feedback and will share it with our teams. If you would like to expand your soundbars audio experience you can add the SWA-9250S Wireless Rear Speaker Kit, upgrading your HW-Q600F to a 5.1.2 channel system. If we can help with anything else, please call us at 1-800-SAMSUNG (Ask for Soundbars), Mon – Fri 8 AM – 9 PM EST, Sat & Sun 8 AM – 6 PM EST. Live Chat with an agent as well as manuals, software, creating a service ticket, and warranty info can be found at the ‘Support’ link on our Samsung website. ~ Samsung Solutions
2026-08-24
2026-08-24
2026-08-22
2026-08-20
Samsung Solutions
Hi Cuong, Thank you for sharing your feedback and experience with the HW-Q990F soundbar. We're glad you're exploring its features and want to help you get the most out of your audio setup. This soundbar offers a wide range of audio adjustments to fine-tune the sound to your preferences. You can manually optimize your audio experience using the SOUND CONTROL button (identified by a gear icon) on the remote. This allows you to access and adjust settings like Auto EQ, SpaceFit Sound, AVA (Active Voice Amplifier), Voice Enhance Mode, Night Mode, Sync, Surround Speaker Mode, and Virtual Sound Mode. Use the Up and Down buttons to navigate and adjust each feature. For more precise sound tuning, press and hold the SOUND CONTROL button for about five seconds. This enables you to adjust specific frequency bands, including 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz. You can cycle through these frequencies using the Left and Right buttons, and adjust their levels between -6 and +6 using the Up and Down buttons. If you’d prefer a quicker way to optimize your audio, simply press the SOUND MODE button on your remote and select from STANDARD, SURROUND SOUND, GAME, or ADAPTIVE SOUND modes based on your preference. To fine-tune individual speaker channels, press the CH LEVEL button on your remote. This gives you control over levels for the Center, Side, Wide, Front Top, Rear, and Rear Top speakers. Once you've selected the desired channel, you can adjust its volume between -6 and +6 using the Up and Down buttons. There are also a couple of ways to adjust bass levels. The WOOFER button lets you increase or decrease bass by pushing forward or pulling back, with a range between -12 and +6. Pressing the button inward will reset the bass to 0. Alternatively, the TONE CONTROL button allows you to adjust both bass and treble levels within a -6 to +6 range. For even greater convenience, you can manage all of these settings and more through the SmartThings app on your iOS or Android device. After connecting your soundbar to Wi-Fi, the app gives you a user-friendly interface to adjust and view settings right from your phone or tablet. If you need more help, Samsung is here for you. Please call us at 1-800-SAMSUNG, Mon – Fri 8 AM – 9 PM EST, Sat & Sun 8 AM – 6 PM EST. Live Chat with an agent as well as manuals, software, creating a service ticket, and warranty info can be found at the ‘Support’ link on our Samsung website. ~ Samsung Solutions
2026-08-20
2026-08-06
2026-08-06
2026-07-29
Samsung Solutions
Hi brock, Thank you for taking a moment to review the Samsung HW-Q600F Soundbar. You may want to initialize your soundbar by pressing the - and + (volume) buttons on the top of the soundbar at the same time for at least 5 seconds. “INIT OK” appears on the display and then the Soundbar is reset. Please know, this will reset all settings on the soundbar back to default; any sound adjustments will need to be performed again. If you need more help, Samsung is here for you. Please call us at 1-800-SAMSUNG, Mon – Fri 8 AM – 9 PM EST, Sat & Sun 8 AM – 6 PM EST. Live Chat with an agent as well as manuals, software, creating a service ticket, and warranty info can be found at the ‘Support’ link on our Samsung website. ~ Samsung Solutions
2026-07-29
Pennsylvania
Samsung Solutions
Hi RobD, We appreciate you taking a few moments to review the HW-Q600F Samsung Soundbar. Here are some troubleshooting steps that may help: First, make sure your Soundbar is running the latest firmware. Visit Samsung.com, select Support > Manuals & Software > TVs & Home Audio > Home Audio > Soundbars, then locate your Soundbar model and download the newest firmware version. The update can be installed using a USB flash drive, and Samsung provides step-by-step instructions on the support page. You should also verify that your TV has the latest software installed by navigating to Settings > Support > Software Update on your TV. Next, perform a soft reset by unplugging the Soundbar from power for approximately 30 seconds, then plugging it back in and testing it again. If the issue persists, perform a factory reset. With the Soundbar powered on, press and hold the Volume + and Volume - buttons on the Soundbar itself for at least 5 seconds until "INIT OK" or "INIT" appears on the display. You can also reset the Soundbar using the remote: with the Soundbar powered on, press and hold the Sound Control (Gear) button for about 10 seconds. When "150HZ" appears on the display, continue holding the button until "INIT" appears, then release it. If you need more help, Samsung is here for you. Please call us at 1-800-SAMSUNG, Mon – Fri 8 AM – 9 PM EST, Sat & Sun 8 AM – 6 PM EST. Live Chat with an agent as well as manuals, software, creating a service ticket, and warranty info can be found at the ‘Support’ link on our Samsung website. ~ Samsung Solutions
2026-07-26
Md
2026-07-26
Texas
2026-07-24
Samsung Solutions
Hello PleaseGimme500, Thank you for sharing your review of Samsung’s HW-Q600F Soundbar. We’re sorry your experience didn’t match your expectations. Your feedback is very important to us as we continuously strive for best-in-class product and service. Updating the firmware on your soundbar gives you all the benefits of the latest improvements. When an update is available, you can update the Soundbar by connecting the USB drive that contains the update firmware to the SERVICE port of the Soundbar. 1.Go to the Samsung Electronics website (www.samsung.com) → click on the “Support” option in the upper right corner. 2.Click on “Manuals & Software” from the pop-up list > TVs & Home Theater > Home Theater > Select your model 2. Download the firmware file (USB type). 3. Unzip the file to create a folder with the file name. 4. Store the created folder in a USB and then connect it to the Soundbar. 5. A sequence of “UPDATE” > “BYE” > “ON” will appear on the display 3 times. This will take around 6 minutes. - During update, do not turn it off or remove the USB. - If “UPDATE” does not appear on the display window, remove the power cord from the Soundbar and then reconnect it. - When the latest Version is installed, no update is performed. - Depending on the USB type, update may not be supported. 6. After the 3 cycles are complete, the Soundbar will restart and last source used will appear on the display for about 20 seconds and then it will go off (“UPDATE” > “BYE” > “ON”) 3 times “D.IN” > off If you need more help, Samsung is here for you. Please call us at 1-800-SAMSUNG, Mon – Fri 8 AM – 9 PM EST, Sat & Sun 8 AM – 6 PM EST. Live Chat with an agent as well as manuals, software, creating a service ticket, and warranty info can be found at the ‘Support’ link on our Samsung website. ~ Samsung Solutions
2026-07-21
North Las Vegas, NV
2026-07-20
2026-07-16
Mesa, Arizona
Samsung Solutions
Hello CNSOLEIL, Thank you for taking a moment to review the Samsung HW-Q600F Soundbar. You can manually optimize your audio experience by pressing the SOUND MODE button to select the desired pre-equalized sound setting. The choices are SURROUND SOUND – GAME – ADAPTIVE SOUND – DTS VIRTUAL:X – STANDARD. To control the volume of the treble or bass sound, press the TONE CONTROL button and then adjust the volume between -6 to +6 by using the Up/Down buttons. Press and hold the SOUND CONTROL button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to “STANDARD”.) Press the CH LEVEL button so you can adjust the volume of each speaker. CENTER LEVEL or TOP LEVEL can be adjusted using the UP/DOWN buttons from -6 to +6. With the optional SWA-9250S Wireless Rear Speaker Kit connected you can adjust the volume by using the provided Soundbar remote. Press CH LEVEL and select REAR LEVEL, then use the Up/Down buttons to adjust the volume within a -6 to +6 range. If you need more help, Samsung is here for you. Please call us at 1-800-SAMSUNG, Mon – Fri 8 AM – 9 PM EST, Sat & Sun 8 AM – 6 PM EST. Live Chat with an agent as well as manuals, software, creating a service ticket, and warranty info can be found at the ‘Support’ link on our Samsung website. ~ Samsung Solutions
2026-07-15
2026-07-13
2026-07-09
2026-07-08
Florida
2026-07-07
2026-07-05
2026-07-02
2026-06-27
2026-06-24
2026-06-24
2026-06-23
2026-06-23
Alfred Samsung CS
Hello, We appreciate you sharing your experience with us. We’re sorry to hear that you experienced challenges with your product and will share this feedback to our relevant teams. If you would like to provide additional feedback or discuss this ticket further, our email support will be happy to assist by visiting https://www.samsung.com/ca/support/emailsupport and choosing ‘Email General Support’ and providing the Subject Line: Samsung Review Case – Q-series Soundbar HW-Q600F 3.1.2 ch Subwoofer with Dolby Atmos. Thank you, Samsung Customer Care
2026-06-23
2026-06-19
Texas
2026-06-19
Puyallup, Wa
2026-06-16
South Dakota
2026-06-16
Pittsburgh PA
2026-06-15
Portland oregon
2026-06-15
2026-06-15
Modesto,CA
2026-06-15
Overland Park KS
Samsung Solutions
Hi kearneycom, We appreciate you taking a moment to review the Samsung HW-Q600F Soundbar. If the video on the TV and audio from the soundbar are not synchronized, press the SOUND CONTROL button on the soundbar remote, until you see AUDIO SYNC on the display. You can then set the audio delay between 0~300 milliseconds by using the Up/Down buttons. Additionally, please make sure your soundbar is using the latest firmware version. You can update the firmware version of your soundbar by using a USB device. If available, you may also want to update the firmware Version of your TV which may feature audio delay improvements. If you continue to experience audio delay, and are connected wirelessly, please use the included HDMI cable to connect the soundbar to the TV. Using a wired connection instead of wireless often eliminates the audio delay entirely and improves the user experience. If you need more help, Samsung is here for you. Please call us at 1-800-SAMSUNG, Mon – Fri 8 AM – 9 PM EST, Sat & Sun 8 AM – 6 PM EST. Live Chat with an agent as well as manuals, software, creating a service ticket, and warranty info can be found at the ‘Support’ link on our Samsung website. ~ Samsung Solutions
2026-06-15
Texas
2026-06-15
Chicago, IL
2026-06-15
2026-06-15
Florida
2026-06-15
Miami, FL
2026-06-14
Diepkloof,South Africa
2026-06-10
Spokane Valley Wa
2026-06-06
Yellville, Arkansas
2026-06-06
SEATTLE WASHINGTON
2026-06-06
Santa Clara, CA
2026-06-05
Texas
Näitä arvosteluja hallitsee Bazaarvoice, ja ne vastaavat Bazaarvoicen Authenticity Policy -aitouskäytäntöä, jota tukevat petostentorjuntatekniikka ja ihmisten tekemät analyysit.
Lisätietoja osoitteessa