Type of cleaning modes for Samsung POWERbot Robot

Last Update Date : Jul 12. 2018

Four cleaning modes are available while using your POWERbot: Auto clean, Spot clean, Repeat clean, and Manual clean.

Please note: Emergency switch on the bottom of the unit must be switched on before using POWERbot

Auto Clean

Auto CleanClick to Expand

To select this mode, press and release the Auto Clean button (left image) on the remote or the POWERbot. To stop cleaning, press and release the button again.

The display panel will show the respective icon (centre and right images) as shown below.

Display Panel for Auto Clean

With the Auto Clean mode selected, Samsung POWERbot Robot will automatically cleans the set areas only once.

Auto Clean Mode

Please note:
• If cleaning in Auto clean mode is completed within 15 minutes, POWERbot cleans 1 more time
• If Auto clean or Repeat clean is selected, the POWERbot cleans the area near the docking station first

Spot clean

Spot CleanClick to Expand

To select this mode, press the Spot Clean button (left image) on the POWERbot. You can also select it by pressing the Spot button on the remote.

The display panel will show the respective icon (centre and right images) as shown below.

Display Panel for Spot Clean

With the Spot Clean mode selected, Samsung POWERbot Robot will clean a localized area intensely. It can be used to clean bread or cookie crumbs.

Spot Clean

Manual clean

Manual CleanClick to Expand

With the Manual Clean mode selected, the display panel will show the respective icon as shown below.

Display Panel for Manual Clean

You can move POWERbot with the remote control to clean the desired spot using the direction control buttons.

Manual Clean Mode
Select manual clean mode using the direction control buttons on the remote control

Please note:
• This function is not applicable to SR10M701*** series
• Moving backward is not available

Repeat Clean

Repeat CleanClick to Expand

To select this mode, press the Repeat button on the remote, follow by pressing the Auto Clean button on the remote or the POWERbot to start the cleaning program.

The display panel will show the respective icon as shown below.

Display Panel for Repeat Clean

With the Repeat Clean mode selected, Samsung POWERbot Robot will clean repeatedly until the battery is depleted.

Please note:
• This function is not applicable to SR10M701*** series
• To deactivate Repeat clean mode, press the Repeat button on the remote

Using special cleaning functions

Using special cleaning functionsClick to Expand

• Smart Clean - When the POWERbot detects acarpet in normal mode, it willautomatically operate withstronger suction power


• Edge Clean Master - When the POWERbot detects anedge or corner in Auto clean orSpot clean, the auto shutter tooloperates and approaches theedge or corner section to clean

Thank you for your feedback!

Need more help? Contact Us.

Online

Live Chat

Monday to Friday (Excluding Public Holidays)
9:00am - 7:00pm

Email

We'll respond within 24 hours of your request.

Email to CEO

Contact the dedicated CEO's Office.

Call

1800-4252997For Mobile Device and Samsung Apps Enquiries

+65 69161260From Oversea

1800-7267864For other Products Enquiries

+65 69161261From Oversea

Monday to Sunday (Including Public Holidays)
8:00am - 8:00pm

* For any printer related enquiries, please visit HP website .

Face-to-face support

Samsung Service Centres

Find out more about how you can get face-to-face help.

Contact Us