Bespoke AI WindFree™ Wall-mount Air Conditioner Radar Sensor 1.0HP
Gallery popup
Please scan the QR Code with your mobile device, and place the product image in your desired location.
Highlights
Features
AI-tailored cooling
Motion Wings
WindFree™
Clean & Hygiene
Efficiency
Performance
Convenience
Convenience
SmartThings
Reliability
Reliability
Design
Specifications
-
Net Dimension (Outdoor, WxHxD, mm)
790*548*285 mm
-
Capacity (Cooling, kJ/h)
10600 kJ/hW
-
Net Weight (Indoor, kg)
9.6 kg
-
Electrical Data
1 / 220-240V~/ 50/60Hz
-
Capacity (Cooling, kJ/h)
10600 kJ/hW
-
Capacity (Cooling, Min - Max, kJ/h)
4220 - 13715 kJ/hW
-
Noise Level (Indoor, High/Low, dBA)
39/20 dBA
-
Noise Level (Outdoor, High/Low, dBA)
48 dBA
-
Power Source(Φ/V/Hz)
1 / 220-240V~/ 50/60Hz
-
Power Consumption(Cooling, W)
680 W
-
Operating Current(Cooling, A)
3.6 A
-
Net Dimension (Indoor, WxHxD, mm)
820*299*230 mm
-
Net Dimension (Outdoor, WxHxD, mm)
790*548*285 mm
-
Net Weight (Indoor, kg)
9.6 kg
-
Net Weight (Outdoor, kg)
27.1 kg
-
Piping Length (Max, m)
15 m
-
Piping Height (Max, m)
8 m
-
SVC Valve (Liquid (ODxL))
6.35
-
SVC Valve (Gas (ODxL))
9.52
-
Moisture Removal (l/hr)
1.14 l/hr
-
Air Circulation (Cooling, ㎥/min)
10.1 ㎥/min
-
Refrigerant (Type)
R32
-
Refrigerant (Charging, tCO2e)
0.40 tCO2e
-
Low Ambient (Cooling, ℃)
16~46 ℃
-
Outdoor Unit (Compressor Type)
BLDC
-
Outdoor Unit (Anti-Corrosion Fin)
Yes
-
WindFree Cooling
Yes
-
Air Direction Control (Up/Down)
Auto
-
Air Direction Control (Left/Right)
Auto
-
Air Flow Control Step (Cool/Fan)
5/4
-
PM 1.0 Filter
No
-
Tri Care Filter
No
-
4-in-1 Care Filter
Yes
-
Easy Filter Plus (Anti-Bacteria)
No
-
Copper Anti-bacterial Filter
Yes
-
Auto Clean (Self Cleaning)
Yes
-
SmartThings
Yes
-
AI Auto Cooling
Yes
-
Motion Detect Sensor
Yes
-
Freeze Wash
Yes
-
Beep On/Off
Yes
-
24-Hour Timer
Yes
-
Auto Restart
Yes
-
Auto Mode
Yes
-
Fast Cool
Yes
-
Dry Comfort
Yes
-
Good Sleep
Yes
-
Eco Mode
Yes
-
Dehumidification
Yes
-
Fan Mode
Yes
-
Quiet
Yes
-
WiFi Embedded
Yes
-
SmartThings App Support
YES
User manual & downloads
Solutions & Tips
- 1. * Based on internal testing on the AR70H12CAAWNER compared with the Samsung conventional AQ12EASER model - Installation area of 68㎥ at 35℃, standard outdoor cooling condition. - Time taken for indoor temperature to drop from 33℃ to 25℃ in Max mode. - values may vary depending on the actual testing conditions and environment. ** Based on internal testing on the AR70H12CAAWNER compared with the AR12TXCAAWKEU old model - Installation area of 326㎥ (positioned at 2m height) at 35℃, standard outdoor cooling condition. - Distance of airflow reach measured during cooling operation, at maximum airflow and the highest blades position setting. Go to feature
- 2. * Based on internal testing on the AR70H12CAAWNER compared with the Samsung conventional AQ12EASER model - Installation area of 68㎥ at 35℃, standard outdoor cooling condition. - Time taken for indoor temperature to drop from 33℃ to 25℃ in Max mode. - values may vary depending on the actual testing conditions and environment. ** Based on internal testing on the AR70H12CAAWNER compared with the AR12TXCAAWKEU old model - Installation area of 326㎥ (positioned at 2m height) at 35℃, standard outdoor cooling condition. - Distance of airflow reach measured during cooling operation, at maximum airflow and the highest blades position setting. Go to feature
- 3. * Based on internal testing on the AR70H12CAAWNER compared with the Samsung conventional AQ12EASER model - Installation area of 68㎥ at 35℃, standard outdoor cooling condition. - Time taken for indoor temperature to drop from 33℃ to 25℃ in Max mode. - values may vary depending on the actual testing conditions and environment. ** Based on internal testing on the AR70H12CAAWNER compared with the AR12TXCAAWKEU old model - Installation area of 326㎥ (positioned at 2m height) at 35℃, standard outdoor cooling condition. - Distance of airflow reach measured during cooling operation, at maximum airflow and the highest blades position setting. Go to feature
- 4. * Based on internal testing on the AR70H12CAAWNER compared with the Samsung conventional AQ12EASER model - Installation area of 68㎥ at 35℃, standard outdoor cooling condition. - Time taken for indoor temperature to drop from 33℃ to 25℃ in Max mode. - values may vary depending on the actual testing conditions and environment. ** Based on internal testing on the AR70H12CAAWNER compared with the AR12TXCAAWKEU old model - Installation area of 326㎥ (positioned at 2m height) at 35℃, standard outdoor cooling condition. - Distance of airflow reach measured during cooling operation, at maximum airflow and the highest blades position setting. Go to feature
- 5. * Based on internal testing on the AR70H12CAAWNER compared with the Samsung conventional AQ12EASER model - Installation area of 68㎥ at 35℃, standard outdoor cooling condition. - Time taken for indoor temperature to drop from 33℃ to 25℃ in Max mode. - values may vary depending on the actual testing conditions and environment. ** Based on internal testing on the AR70H12CAAWNER compared with the AR12TXCAAWKEU old model - Installation area of 326㎥ (positioned at 2m height) at 35℃, standard outdoor cooling condition. - Distance of airflow reach measured during cooling operation, at maximum airflow and the highest blades position setting. Go to feature
- 6. * Based on internal testing on the AR70H12CAAWNER compared with the Samsung conventional AQ12EASER model - Installation area of 68㎥ at 35℃, standard outdoor cooling condition. - Time taken for indoor temperature to drop from 33℃ to 25℃ in Max mode. - values may vary depending on the actual testing conditions and environment. ** Based on internal testing on the AR70H12CAAWNER compared with the AR12TXCAAWKEU old model - Installation area of 326㎥ (positioned at 2m height) at 35℃, standard outdoor cooling condition. - Distance of airflow reach measured during cooling operation, at maximum airflow and the highest blades position setting. Go to feature
- 7. * The testing was conducted in Samsung’s 132m² residential environment laboratory at a temperature of 35°C/24°C (dry bulb/wet bulb, KS C 9306: air conditioner). Results provided to and interpreted by Intertek, comparing the power consumption between AI energy mode on and off in AI comfort mode of AR07D9181HZN model. Actual savings may vary by usage patterns and environment and the set temperature may increase by up to 2 degrees. Requires the use of the SmartThings App and a Samsung account. Go to feature
- 8. * Motion Wings consist of two outer blades (top and bottom) and one inner blade (middle).** Based on internal testing on the AR70H12CAAWNEU model compared with AR12TXCAAWNEU.*** The blade motion range has been expanded from 30~80°(45°) to front 0~90° and bottom -70~0°. Go to feature
- 9. * ASHRAE (American Society of Heating, Refrigerating, and Air-Conditioning Engineers) defines “Still Air” as air currents at speeds below 0.15m/s that lack the presence of cold drafts. Go to feature
- 10. * It can be used when linking a Samsung smartphone with Samsung software One UI version 4.0 or later and a wearable device that supports Wear OS: Galaxy Watch 4 or later, Fit 3 or later, Galaxy Ring.** You must download the Samsung SmartThings App on the wearable device and connect the air conditioner to your home Wi-Fi. You can set it in the Samsung Watch App's 'Sleep well with smart devices' or Settings > Mode and routine > Sleep menu, and you must wear the device while sleeping. SmartThings is optimized for Samsung smartphones and Galaxy Watches, and some functions may be limited when used on smartphones and watches from other manufacturers.*** Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required. Go to feature
- 11. * Based on internal testing on the AR70H12CAAW/EU model in accordance with Samsung protocols. Results provided to and interpreted by Intertek, comparing the power consumption of Fast Cooling mode vs. WindFree™ Cooling mode. Results may vary depending on the actual usage conditions. Go to feature
- 12. * Based on internal testing on the AR12TXCAAWKNEU model. WindFree™ mode generates only 23dB of noise, compared to 26dB with the Samsung conventional model. Go to feature
- 13. * Based on internal testing in accordance with Samsung protocols. Results provided to and interpreted by Intertek. Removes 99% of certain bacteria, including Staphylococcus aureus and Escherichia coli. Results may vary depending on environmental factors and individual use.** Based on internal testing. Removes 50% of 0.3µm size dust particles in a 30m² indoor area with 10 minutes operation per hour. Tested on the AR13TYAAAWKNST model. Results may vary depending on environmental factors and individual use.*** It can only be set using a mobile App.**** The PM 1.0 Filter line-up may differ between regions. Go to feature
- 14. * It can only be set using a mobile App.** Based on internal testing. The set was installed in a 30㎥ chamber and tested for cleaning performance according to the CAC certification test method. Once every 3 months in 1year, it was soaked in water with a neutral detergent for 30 minutes and then rinsed with water.*** The PM 1.0 Filter line-up may differ between regions. Go to feature
- 15. * Tested by Intertek for anti-bacteria properties, the Chungbuk National University (Korea), witnessed by Intertek, for anti-virus properties, the Japan test lab (ITEA) for anti-allergy properties and the Korea test lab (KITECH) for PM2.5 dust collection. The filter performance is based on testing of the filter material and not a specific model. Data has been measured under specific testing conditions and may vary depending on environmental factors and individual use. Go to feature
- 16. * Tested by Intertek. Data has been measured under specific testing conditions and may vary depending on environmental factors and individual use. Go to feature
- 17. * This the test results verified by Intertek, an international testing and inspection agency, and actual results may vary depending on the usage environment.- Test method: Bacteria were applied to the surface of the heat exchanger, and the WashClean function was activated. The reduction rate was calculated by averaging the values measured from three samples.Test bacteria: Escherichia coli (Escherichia coli ATCC 8739), Staphylococcus aureus (Staphylococcus aureus ATCC 6538)** It is available to set up in the SmartThings app, which is supported on Android and iOS devices. *** Notifications are available when connected to Wi-Fi and a Samsung account are required. Go to feature
- 18. * Notifications are available when connected to Wi-Fi and a Samsung account are required. Go to feature
- 19. * The Auto Clean time will vary depending on the condition of the air conditioner.** The Auto Clean while away can be set up through the SmartThings App. Go to feature
- 20. * A Wi-Fi connection is required. Only available when AI Auto Cooling mode is selected. Go to feature
- 21. * You can customize settings through SmartThings.** You need to restart with remote or SmartThings app after power is turned off. Go to feature
- 22. * Based on internal testing on the AR70H12CAAWNER compared with the Samsung conventional AQ12EASER model - Installation area of 68㎥ at 35℃, standard outdoor cooling condition. - Time taken for indoor temperature to drop from 33℃ to 25℃ in Max mode. - values may vary depending on the actual testing conditions and environment. ** Tested on the AR70H24C1AWNER model during cooling operation, at maximum airflow and the highest blades position setting. Go to feature
- 23. * Based on EN14825 standards and internal testing results; actual performance may vary depending on conditions. Fixed-speed model AQ09TSLXEA(power consumption of 374 kWh) vs Inverter new model AR70H09CAAW/EU(power consumption of 90 kWh). Go to feature
- 24. * Based on internal testing - values may vary depending on the actual testing conditions and environment. -Installation area of 68㎥ at 7℃, standard outdoor cooling condition.-Time taken for indoor temperature to rise from 9℃ to 20℃ in Max mode.-Test models: AQ12EASER(older model), AR70H12CAAWNEU(new model). Go to feature
- 25. * Based on internal testing. Generates a 40% reduction in the 1kHz noise band, which is the weakest level of sound that humans are sensitive to. Go to feature
- 26. * 85L model only.** Based on internal testing compared to Samsung’s existing outdoor unit. Go to feature
- 27. * GWP by refrigerant: R32 = 675, R22 = 1810, R410A = 2090. Go to feature
- 28. * Based on internal testing comparing the Dry Mode and Dry Comfort Mode on the AR50F12C1AH/EU model. Tested in a 66m² chamber at 27°C(DB)/24°C(WB) over a 2 hour period and the power consumption compared when the relative humidity is below 60% for each Dry mode.=> Tested by Intertek, based on testing comparing the conventional Dry Mode and new Dry Comfort Mode on the AR80F07D21WN model. Tested in a 68㎥ chamber at 27°C(DB)/24°C(WB) over 2 hours and the power saving rate is obtained by comparing each mode integrated power under the condition of maintaining indoor relative humidity below 60%, which is the comfortable humidity level. Go to feature
- 29. * Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required. Go to feature
- 30. * Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.** The Welcome & Away Care (energy saving notification) function uses smartphone Geofencing and GPS to determine whether you are close to your personal set location, and its performance may vary depending on the actual usage environment and the cooling function of each model. Go to feature
- 31. * It is available to set up and check in the SmartThings app, which is supported on Android and iOS devices. A Wi-Fi connection and a Samsung account are required. Go to feature
- 32. * Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required. SmartThings Air Care feature may vary by region and is currently available in the following countries: Korea, USA, UAE, Chile, Poland, Australia, Indonesia. Go to feature
- 33. * Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required. Go to feature
- 34. * Only available on certain models.** Operates safely using either 127V or 220V power outlets. Go to feature
- 35. * A Wireless Auto Ampere Control+ kit is required to use this function. This function is available to use with SmartThings.** When using the Auto Ampere Control+ mode, the cooling and heating performance may be weakened so that the operating current does not exceed the set current, depending on the indoor/outdoor environment.*** One or more of the Wireless Auto Ampere Control+ kits can be installed to suit the size and environmental conditions of the installation area. Go to feature
- 36. * Only available when the air conditioner is in Cooling mode, but not in WindFree™ mode.** Based on internal testing on the AR24AY4YATAN compared with Samsung conventional models, measuring the power consumption of the Normal mode vs. 5-step Convertible Cooling mode. Tested based on the Cooling Standard (Out 35℃ DB / 24℃ WB, In 27℃ DB / 19℃ WB). The results may vary depending on the model, environmental factors and individual use. Go to feature
- 37. * Only available when using Samsung Galaxy smartphones. A Wi-Fi connection and a Samsung account are required.** The air conditioner must be connected to the Wi-Fi network and registered in the SmartThings App. Only certain models of air conditioners manufactured in 2024 or later are supported.*** The automatic activation time varies depending on the user environment.**** The controllable functions of compatible devices may vary depending on their specification or the usage environment, especially B2B products and some special models manufactured in 2024. Go to feature
- 38. * Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required. Go to feature
- 39. * Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.** Service callouts will occasionally be required and may incur extra repair costs. Go to feature
- 40. * You can start optimized cooling by setting your room size with SmartThing app(Product plugin menu-Settings-Adjust room size). Go to feature
- 41. * Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.** A Wi-Fi connection is required*** Bixby is Samsung’s brand of Internet of Things (IoT) voice assistant. Bixby service availability may vary depending on country. Bixby recognizes selected languages and certain accents/dialects. The user interface may change and differ by device. The availability of Bixby features and content providers may vary depending on the country/carrier/language/device model/OS version. A Samsung account log-in and data network connection (Wi-Fi or data network) are required.**** Amazon, Alexa and all related logos are trademarks of Amazon.Com, Inc. or its affiliates.***** Google is a trademark of Google LLC. Go to feature
- 42. * Available on eligible smart home appliances equipped with a Wi-Fi module and released in 2024 or later. Software update support may be limited by hardware capabilities (e.g., memory capacity or chip performance). Go to feature
- 43. * Includes both fault and non-fault diagnosis. The fault diagnosis is based on an error code on the product while the non-fault diagnosis is a perceived defect that occurs as a usability issue without generating an error code. Certain issues can be detected by AI based on the operational data, regardless of whether it generates an error code or not.** Only available on SmartThings-supported models produced after 2018. Requires the SmartThings App, which is available on Android and iOS devices. A Wi-Fi connection and a Samsung account are also required. Go to feature
- 44. * The 10 year parts warranty is only applicable to the inverter compressor. Go to feature
- 45. * Based on internal testing on the AR13TYHYBWKNST model compared with the Samsung conventional model AR18JRFNFWK. Go to feature
- 46. * Based on internal testing by applying pressure (42kgf/cm2) using nitrogen for 1 minute after a Salt Spray Test (SST) of over 500 hours, in accordance with ASTM B117 and KS D(ISO 9227). Go to feature
- 47. * Based on internal testing by applying pressure (42kgf/cm2) using nitrogen for 1 minute after a Salt Spray Test (SST) of over 10,000 hours, in accordance with ASTM B117 (ISO 9227). Go to feature
- 48. * Based on internal testing on the AR12TXEAAWKNEU model compared with the Samsung conventional model AS18FCMID. Go to feature
- 49. * Based on testing by TUV Rheinland in accordance with the ASTM G85 Annex A3 modified-SWAAT test, compared to the non-coated copper tube. The level of corrosion resistance is based on the reduction rate of the copper tube’s thickness. The original thickness of each copper tube was 206㎛. After 40 days, the coated copper tube was 186㎛ thick and the non-coated copper tube was 52㎛ thick. Go to feature
- 50. * Based on internal testing and certified by Intertek. Go to feature
- 51. * Based on internal testing on the AR**CSDACWKXCV model. Test conditions: Indoor (DB 21.1°C / WB 15.6°C), Outdoor (DB -20°C).** Based on internal testing on the AR**CSDABWKXCV model. Test Conditions: Indoor (DB 21.1°C / WB 15.6°C), Outdoor (DB -30°C). Go to feature
All specifications and descriptions provided herein may be different from the actual specifications and descriptions for the product. Samsung reserves the right to make changes to this document and the product described herein, at anytime, without obligation on Samsung to provide notification of such change. All functionality, features, specifications, GUI and other product information provided in this document including, but not limited to, the benefits, design, pricing, components, performance, availability, and capabilities of the product are subject to change without notice or obligation. The contents seen on or with the product are oftentimes simulated and are for demonstration purposes only.