Check out the information codes on my oven

C-d0

Button problem

This displays when a button is pressed and held for

a period of time.

Clean the buttons and make sure there is no water on/around them.

Turn off the oven and try again. 

S-01

Safety shutoff

Oven has continued operating at a set temperature for

an extended time period.

• • Under  105°C: 16 hours
• • From 105°C to 240°C: 8 hours
• • From 245°C to max: 4 hours

This is not a system failure.

Turn off the oven and remove the food. Then try again normally.

dC

dE

Divider check needed

If the divider is removed during cooking in Dual cook mode. 

If the divider is inserted during cooking in Single cook mode.

The divider must not be removed during cooking in Dual cook mode.

Turn off the oven and then restart.

If the problem continues, turn off the power for 30 seconds

or more and then reconnect. 

C-d1

Door lock malfunctions

Turn off the oven and then restart.

If the problem continues, turn off the power for 30 seconds

or more and then reconnect.

C-20

C-21

C-22

Sensor malfunctions

Turn off the oven and then restart.

If the problem continues, turn off the power for 30 seconds

or more and then reconnect. 

C-F1

Only occurs during EEPROM Read/Write.

Turn off the oven and then restart.

If the problem continues, turn off the power for 30 seconds or more and then reconnect.

C-F0

If there is no communication between the main PCB

and sub PCB.

Turn off the oven and then restart.

If the problem continues, turn off the power for 30 seconds or more and then reconnect.

C-F2

Occurs when a communication problem is maintained between the Touch IC and Main or Sub micom.

Turn off the oven and then restart.

If the problem continues, turn off the power for 30 seconds or more and then reconnect.

Pr E

This code means the oven is preheating.

Pr E will display until the temperature is reached at the setting temperature. When the temperature reaches at the desired temperature, Pr E will disappear.

While preheating, please keep the door closed.