How to use the racks in Samsung oven

Wire rack

Use the wire rack for grilling and roasting. When you insert the wire rack into the oven, keep the protruding parts (stoppers on both sides) toward the front.

Some oven models have side racks that are used to hold racks and trays.

Step 1. Press the top line of the left side rack and lower by approximately 45°.

Step 2. Pull and remove the left side rack.

Step 3. Remove the right side rack in the same way.

Step 4. Clean both side racks.

Step 5. When cleaning is done, follow steps 1 to 2 in the reverse order to reinsert the side racks.

Baking tray

The baking tray (depth: 20 mm) is for baking cakes, cookies, and other pastries. Put the slanted side to the front.

Once the telescopic rail is installed, it is effortlessly easy to get things in and out of the oven because of its smooth movement. Use the telescopic rail plate to insert the tray as follows.

Step 1. Pull out the rail plate from the oven.

Step 2. Put the tray on the rail plate and push the rail plate into the oven.

Step 3. Close the oven door.

The divider separates the oven into two compartments for Dual Cook mode. You can use both the upper and lower compartments to cook two different foods, or simply choose one compartment to cook with.

Insert the divider in the middle to separate the cooking chamber in two compartments. Make sure to insert the divider with the Dual Cook wording facing on the front side. Then, the oven senses the divider and its default setting activates the upper compartment.

Certain kinds of detergents and cleaning tools can damage the oven and racks. Check before using them to clean the oven racks.

• Available: Warm soapy water, mild cleaning detergent with a clean cloth, kitchen roll, dry towel.
• Unavailable: Abrasive cleaning agent with a hard brush, scouring pads or cloths, steel wool, knives, or any other abrasive materials.