Clean the filter on your Samsung POWERbot-S
Last Update date : Aug 18. 2023
The filter on your Samsung POWERbot-S vacuum should be cleaned every week. Cleaning the filter is simple and takes only a few minutes to do. You can also rinse the filter to remove additional dust, so that your vacuum continues to perform at its best.
Clean the filter
![A person rinsing the Samsung POWERbot-S vacuum filter in a sink.]()
You can use the steps below to clean the filter on your Samsung POWERbot-S vacuum. It is recommended to clean the filter once every week and replace it every 1 to 3 months.
1
Open the vacuum cover, and then press the Dustbin Release button to remove the dustbin from the vacuum.
![A diagram showing how to release the POWERbot-S vacuum dust bin.]()
2
Next, press the Release button on the dustbin to open and empty it.
![A diagram showing how to open the POWERbot-S vacuum dust bin.]()
3
The filter is located on the side of the dustbin. You can remove dirt and debris by tapping the filter against a trash bin. The filter and its sponge can be removed and rinsed with water if needed.
![A diagram showing how to wash the POWERbot-S vacuum dust bin parts.]()
Note: Make sure the filter and sponge have been thoroughly dried before reattaching them to the dustbin.
4
Reinsert the dustbin, and then close the vacuum cover.
![A diagram showing how to reinsert the POWERbot-S vacuum dust bin.]()
Thank you for your feedback!
Please answer all questions.
Sign Language Support
Book an appointment to connect with a Samsung Sign Language Specialist for support and advice on our products.
Samsung Members
![]()
![]()
Connect with Samsung experts, super-fans, and other Community members for tips on features and how to get the most out of your Samsung product.
Repair Services
![]()
![]()
Arrange an appointment to experience a shorter waiting time.
RC01_Static Content