How to replace batteries in a Samsung TV remote

Learn how to replace batteries in Samsung TV remotes, including Smart Remotes and Standard Remotes, with step-by-step instructions for each model type.

Replacing the batteries in your Samsung TV remote is a simple process that ensures your remote continues to function properly. Follow these detailed steps based on your remote type to replace the batteries efficiently.

1. How to Replace Batteries in Samsung Smart Remote Controls

Samsung Smart Remote Controls come in two distinct types, each with its own method for replacing batteries. Follow the instructions below based on your remote model.

1.1 First Type: Push-and-Slide Method

1. Push the rear cover open in the direction of the arrow at the bottom of the remote control. Hold the remote with both hands and gently push forward with your thumbs.
2. Insert two 1.5V AA batteries, ensuring the positive (+) and negative (-) ends are aligned correctly with the markings in the compartment.
3. Close the rear cover securely.

1.2 Second Type: Slide-and-Remove Method

1. Press the arrow button at the top rear of the remote. The body will pop out slightly from the cover.
2. Turn the remote over and slide the body upward to reveal the battery compartment.
3. If there are existing batteries, press the right and left arrow buttons on both sides of the compartment to remove them.
4. Insert two new 1.5V AAA batteries, ensuring the polarities are correctly aligned.
5. Slide the body back into place until it is nearly in its original position.
6. Turn the remote over, press and hold the top rear button, and slide the body down to secure it.

2. How to Replace Batteries in Samsung Standard Remote Controls

1. Gently pull on the notch of the battery cover and remove it completely once it comes loose.
2. Insert two AAA batteries, aligning the positive (+) and negative (-) ends with the markings in the compartment.
3. Place the battery cover back onto the remote and insert it fully.
4. Slide the cover into place as shown in the instructions to ensure it is securely attached.

3. Additional Things to Check

- Always match the polarities of the batteries to the symbols in the battery compartment.

- Refer to your user manual for specific instructions related to your remote model.

- For Samsung SolarCell Remotes, visit the linked guide to learn about charging and usage.

4. Supported Samsung TV Models

These instructions apply to most Samsung TV models, including but not limited to:

- Samsung QLED TVs (e.g., Q60A, Q70A)

- Samsung Neo QLED TVs (e.g., QN90B, QN95B)

- Samsung Crystal UHD TVs (e.g., AU8000, AU9000)

- Samsung Frame TVs (e.g., LS03B, LS05B)

5. Related Samsung Support Topics

- How to charge and use the Samsung SolarCell Remote

- Troubleshooting Samsung TV remote connectivity issues

- Replacing batteries in Samsung soundbar remotes