How to set up the water dispenser using the control panel on the refrigerator?
Please check the applicable model among the two types of water dispensers below to see how to set it up.
Control panel: Type 1
Touch the Ice Type button to change the ice type. Each time you touch the Ice Type button, the Cubed and Crushed ice modes alternate, and the Cubed or Crushed ice icon lights up, thereby indicating your selection.
Touch the Cubed button for three seconds to set the Dispenser LED lamp (under the display) to continuous mode so that it stays on continuously.
If you want the Dispenser lamp to come on only when someone uses the dispenser, touch this button for 3 seconds again to turn the continuous mode off.
After changing the water filter, touch the “Crushed/Hold 3 sec for Filter Reset” button for 3 seconds to reset the water filter. The color of the indicator changes from red to off.
- To dispense ice
Step 1. Choose the type of ice by touching the cubed or crushed button.
Step 2. Push the Ice lever dispenser (1) gently with your glass. Ice will be released from the dispenser.
- To dispense water
- Using the Ice & Water Dispenser together
Note:
- If you push the Water and Ice lever at about the same time, the dispenser operates only the option you actually selected or pushed first.
- Please wait 1 second before removing the cup after dispensing water to prevent spills. Do not pull out the lever dispenser after dispensing ice or water. It goes back into position automatically.
Control panel: Type 2
- Water: To dispense chilled water, press Water. The corresponding indicator turns on.
- Lock (Dispenser panel/Dispenser lever): To prevent the use of the dispenser panel buttons and the dispenser lever, press and hold Water for more than 3 seconds. If you press and hold the button again for more than 3 seconds, the dispenser lock will be deactivated.
Note: The Lock on the dispenser panel does not affect the controls on the main panel. To lock the main panel, use the Control Lock function on the main panel.
Press Cubed Ice to dispense cubed ice. The corresponding indicator turns on.
Press Crushed Ice to dispense crushed ice. The corresponding indicator turns on.
- To dispense ice
Step 1. With the Ice Maker enabled, press Cubed Ice or Crushed Ice to select the ice type.
Step 2. Put a water glass under the dispenser, and then push the dispenser lever with the glass. Ice will be dispensed from the dispenser.
- To dispense water
Step 1. Press Water on the dispenser panel.
Step 2. Put a water glass under the dispenser, and then push the dispenser lever.
Note:
- The dispenser will stop dispensing if you keep pushing the dispenser lever for about 1 minute. To dispense more water, release and push the lever again.
- Make sure the glass is in line with the dispenser to prevent the dispensed water from spilling out.
Thank you for your feedback!
Please answer all questions.