Adjusting the Flash Settings on Your Samsung NX1 Camera
To capture a realistic photo of a subject, the amount of light should be constant. When the light source varies, you can use a flash and supply a constant amount of light. Select appropriate settings according to a light source and a subject. See below for instructions and options for flash settings.
Your camera comes with a built-in flash. You can also purchase external flash units with additional capabilities. CLICK HERE if you would like to go to the Samsung accessories external flash page.
Please see the manual, pages 119-121, for additional information about external flash settings (CLICK HERE to download the manual).
To Use the Built-In Flash
To open the built-in flash, press the flash pop-up button. The flash does not fire when the built-in flash is closed.
To Set Flash Options
Make sure the camera is in Shooting Mode (ready to take a photo).
Press MENU > Flash.
|Off: The flash is off.|
|Smart Flash: The camera automatically adjusts the brightness of the flash according to the amount of light in the surrounding environment.|
|Auto: The flash automatically fires in dark locations.|
|Auto Red-eye: The flash automatically fires and reduces red-eye.|
|Fill-in: The flash fires whenever you capture a photo. (Brightness is automatically adjusted.)|
|Fill-in Red: The flash fires whenever you capture a photo and reduces red-eye.|
|1st Curtain: The flash fires immediately after the shutter opens. The camera captures a photo of a subject earlier in an action sequence clearly.
|2nd Curtain: The flash fires just before the shutter closes. The camera captures a photo of a subject later in an action sequence clearly.|
|Hi-speed: If the shutter speed is faster than the camera’s sync speed (the shortest time taken to open and close the shutter), the flash will fire multiple times at high speed. The flash starts to fire while the shutter opens. This option can be set only when you attach a compatible, optional external flash. (SEF-580A)|
How to Reduce the Red-Eye Effect
When you capture a photo of a person in the dark using the flash, a red glow may appear in their eyes. To reduce this red-eye effect, select one of the red-eye options show above (Auto Red-eye or Fill-in Red).
When the red-eye reduction function is used, there are two separate flashes. The subject should not move until after the second flash. If the subject is too far from the camera or moves after the first flash fires, red-eye may not be reduced.
Adjusting the Flash Intensity
When the flash is on, you can adjust the flash intensity plus or minus 2 levels.
In Shooting mode (ready to take a picture), select MENU > Flash.
Select a flash option (listed above).
Press DISP button.
Scroll the command dial 1 or 2, rotate the navigation button, or press [-/-] to adjust the flash intensity.
Tips for Adjusting Flash Intensity
Adjusting the flash intensity may not be effective when:
The subject is too close to the camera.
The ISO sensitivity is set high.
- The exposure value is too large or too small.
The environment is too bright or too dark.
In some shooting modes, you cannot use this function.
If you attach an intensity-adjustable external flash to the camera, the intensity settings of the flash will be applied.
If the subject is too close when you use the flash, some light may be blocked resulting in a dark photo. Make sure that the subject is within the recommended range, which varies by lens.
When a lens hood is attached, the light from the flash can be blocked by the hood. Remove the hood to use the flash.
Other answers that might help
How would you like to contact us?
Chat with us
Live Chat support with a Samsung Care Pro.
Help with your order
Send us your inquiry and we will respond within 24 hours.