The Buds Sleeves are made of a flexible silicone material that you can easily slide on the earbuds. It will only take a minute or two, but it will make a world of difference.
- Pick up the left earbud and the left-side Bud Sleeve. Double check that they match and that you have the correct Sleeve before moving to the next step.
- Place the lower half of the earbud into the corresponding Sleeve.
- Adjust the earbud and the Sleeve until you have a snug fit. Do NOT excessively pull on the Sleeve because it could tear.
- Make sure the earbud’s speaker, touch-sensitive sensor, and microphones are exposed through the holes in the Sleeve. They should not be covered by the Sleeve because it may cause sound issues.
- Lift the bottom part of the attached wingtip, and carefully tug the Bud Sleeve upward, so it can fit underneath the wingtip. Then, readjust the wingtip as needed.
- Repeat the same steps for the right earbud and Bud Sleeve.