Install your custom Samsung Bespoke refrigerator panels

If you order additional color panels for the top (fridge) and bottom (freezer) doors, they will be shipped separately from the fridge. You can install them by following these steps:

1. Using two hands, hold the panel upright. For the top panel, line up the bottom with the bottom portion of the door frame.
   
2. Then, push the bottom of the panel down and gently snap it into place.
   
3. For the bottom panel, line up the top with the door’s top bracket, and then insert the panel into the bracket by pushing up.
   
4. Next, push the panel into the door and snap it into place by pressing on the edges of the panel.
   
5. Secure the top panel by placing three rectangular connector clips into the top of the panel.
   Note: You will need to use the plastic connector clips located inside the bag with the fridge’s user manual. If you ordered a Bespoke fridge with custom color panels included at the time of purchase, two clips per door will already be attached.
   
   
6. Secure the bottom panel with three circular connector clips.
   
7. Repeat the process for the remaining panels.
8. Remove the plastic protective film from the panels by peeling it off. The two top panels are interchangeable, and the two bottom panels are interchangeable, so you can switch them at any time if desired.

If you already own a Bespoke refrigerator, you can purchase additional panels in the color of your choice from our website.

If you're still deciding, you can use the Bespoke Design Studio to get an idea of how the different panel colors will look on your refrigerator before purchasing them.

Whether you're buying a new BESPOKE fridge or looking to change up its style, you'll have an entire selection of unique panel colors to choose from. There are also two types of finishes: steel and glass. The steel has a more metallic look while the glass is glossy. The Bespoke Refrigerator panels are available in the following colors and finishes: