Samsung Bespoke AI Combo is not drying clothes
If your AI Bespoke Combo is not drying as well as you would like, try out these recommendations.

Samsung Bespoke AI Combo is not drying clothes
Bespoke AI Ventless Laundry Combo is not drying clothes
Bespoke AI Vented Laundry Combo is not drying clothes
If your clothes are not dry, please check the following:
- Make sure the Laundry Combo is not overloaded. This may result in longer drying times.
- Dry heavy fabrics separately from light fabrics.
- Very small items may not dry thoroughly. Additionally, if the load is too small, it may not tumble properly. You can add some towels to the load, and then restart the cycle.
- Check the Laundry Combo’s lint filter and heat exchanger, and clean them if necessary.
- If a drain hose is connected, make sure the water is draining properly.
- Check the Heat setting to ensure "No heat / Air" has not been accidentally selected.
Drying times based on load weight
Weight in pounds | Time in minutes |
---|---|
Less than 4.4 | 57 - 66 |
4.4 - 6.1 | 57 - 72 |
6.1 - 8.1 | 81 - 90 |
8.2 - 11 | 90 - 110 |
11.1 - 13.2 | 99 - 121 |
13.2 - 15.4 | 171 - 209 |
15.5 - 17.6 | 171 - 209 |
19.8 - 26.5 | 234 - 286 |
Higher than 26.6 | 270 - 330 |
Recommended load by cycle
Cycle | Load Size | Recommended items |
---|---|---|
Normal | Large | Mixed loads of cotton and synthetic fibers |
AI Opti Wash & Dry | Large | Mixed loads of cotton and synthetic fibers |
Super Speed | Small | Synthetic fibers |
Heavy Duty | Medium | Heavy fabrics like jeans, corduroys, heavy work clothes |
Small Load | Small | Small loads |
Tide POD Cold | Large | Mixed loads of cotton and synthetic fibers |
Delicates | Small | Undergarments |
Steam Whites | Large | Mixed loads of cotton and synthetic fibers |
Steam Sanitize | Large | Bedding, curtains, children's clothing |
Steam Normal | Large | Mixed loads of cotton and synthetic fibers |
Towels | Medium | Bath towels and similar items |
Bedding | Medium | Blankets, sheets, comforters, pillows |
Activewear | Small | Exercise wear and jerseys |
Wool | Small | Machine washable and tumble dryable wool items |
Colors | Large | Mixed loads of cotton and synthetic fibers |
Perm Press | Small | Wrinkle-free cotton, synthetic fibers |
Eco Cold | Large | Mixed loads of cotton and synthetic fibers |
Time Dry | Large | Any load |
Air Fluff | Small | All types of fabric |
- Large - Drum 3/4 full
- Medium - Drum 1/2 full
- Small - Drum not more than 1/4 full
Note
For best results using the Super Speed cycle, the recommended load weight is less than 10lb. For Small load, the weight should be less than 2lb.
- Adjust the dryness level to More and the Drying Temp to High.
- Turn off the Eco Dry feature.
Tap the > on the drying options and then turn off Eco Dry.
- Clean the lint filter.
Open the lint filter cover and pull out the filter. Then, remove the inner filter and clean the inner and outer filters. Insert the assembled filter back into place. - Run a vent blockage test.
Make sure the drum is empty, close the door, turn the laundry combo on, tap settings > Washer > Vent Blockage Test > Start test.
If the vent is not blocked, check the dry time recomendations below.
If the vent is blocked, the vent needs to be cleaned.
Load (lbs) |
Display Drying Time (Min.) |
Display Drying Time (Max) |
Actual Dry Time (±10%) |
---|---|---|---|
4.4 lbs |
30 min |
40 min |
approx 40 min |
6.6 lbs |
30 min |
40 min |
approx 40 min |
8.8 lbs |
35 min |
45 min |
approx 43 min |
11 lbs |
40 min |
50 min |
approx 45 min |
13.2 lbs |
45 min |
55 min |
approx 50 min |
15.4 lbs |
50 min |
60 min |
approx 55 min |
17.6 lbs |
55 min |
70 min |
approx 60 min |
19.8 lbs |
60 min |
80 min |
approx 70 min |
22 lbs |
70 min |
90 min |
approx 80 min |
24.3 lbs |
80 min |
100 min |
approx 90 min |
> 24.3 lbs |
90 min |
130 min |
> 100 min |
Recommended Articles

How does the Bespoke AI Laundry Combo dry clothes?
How does the Bespoke AI Laundry Combo dry clothes? If you're thinking a single appliance can't wash and dry clothes, think again! The all new Bespoke AI Laundry Combo unit uses heat pump drying technology to remove water and dry clothes after a cycle. Check out our guide to learn more. How does the Bespoke AI Laundry Combo dry clothes? Your new

Washer Dryer Combo drying cycle gets stuck on load sensing
We have released a software update to address your Samsung Bespoke Laundry Combo getting stuck on the load sensing cycle after a wash cycle finishes, when the AI Pattern setting was turned off. To install this update, follow our instructions to download and install the newest software version.

Cycle end time is incorrect on All-in-One Washer Dryer Combo
The cycle end time will appear incorrectly on your Samsung Bespoke AI Laundry Combo if the time zone and automatic date and time information is not updated. You can resolve this issue by setting the time zone information for your region.
We're here for you
Contact Samsung Support
Contact us online through chat and get support from an expert on your computer, mobile device or tablet. Support is also available on your mobile device through the Samsung Members App.

Fast, easy checkout with Shop Samsung App
Easy sign-in, Samsung Pay, notifications, and more!
Or continue shopping on Samsung.com

×
×
×
You Are About To Be Redirected To Investor Relations Information for U.S.
Thank you for visiting Samsung U.S. Investor Relations. You will be redirected via a new browser window to the Samsung Global website for U.S. investor relations information.×
Redirect Notification
As of Nov. 1, 2017, the Samsung Electronics Co., Ltd. printer business and its related affiliates were transferred to HP Inc.For more information, please visit HP's website: http://www.hp.com/go/samsung
- * For Samsung Supplies information go to: www.hp.com/go/samsungsupplies
- * For S.T.A.R. Program cartridge return & recycling go to: www.hp.com/go/suppliesrecycling
- * For Samsung printer support or service go to: www.hp.com/support/samsung
Select CONTINUE to visit HP's website.