Wash baby bottles in a Samsung dishwasher

Did your baby just finish their lunch? Then let's get that bottle washed and ready for the next meal. Washing glass versus plastic baby bottles is more or less the same, although glass tends to be more durable and will survive more dishwasher cycles over time.

1. After you've made sure the bottles are dishwasher safe, separate the bottle parts, such as the main body and the cap. Then, rinse the bottles and their parts under running water.
   
   
2. Place the bottles and their parts on the top rack of the dishwasher, so they are not close to the heat source. Face the bottles downward to help prevent bacteria growth. The caps, however, should face upward.
3. Make sure to secure the bottles and parts to prevent them from falling over and getting damaged. We recommend using a dishwasher basket designed for baby bottle parts. It will secure the little pieces and help you place the different parts in the correct position.
4. Before you pour or insert dishwasher detergent, be sure you are using a gentle product that is safe for babies.
5. When you’re ready, choose your desired cycle. We recommend using a hot water cycle because it will kill more germs and bacteria.
   
   Note: The caps are usually more sensitive to heat than the main body of the bottle. If you’re worried a hot water cycle will be too hot, it may be better to remove the caps and hand wash them.
   
   
6. Begin the dishwasher by pressing START. For specific instructions on using your Samsung dishwasher, check out your model’s user manual.
7. Once the cycle ends, take out the bottles and their parts, and place them on a baby bottle drying rack if they are still wet. Let the bottles air dry; don’t wipe them with cloths or paper towels. This could transfer germs.
   
   
8. After the bottles have air-dried, store them somewhere that’s protected from dust and dirt.

If your baby bottles are not dishwasher safe or if you’re not sure and just want to play it safe, hand washing bottles only takes a few minutes.

1. First things first, be sure to thoroughly wash your hands. You don’t want to accidentally get germs on the bottle while you’re cleaning it!
2. Separate the bottle parts, such as the main body and the cap, and rinse them with warm water.
3. Next, pour hot water in a clean bucket or large container - make sure it's clean as well!
   
   
4. Add a gentle dishwashing soap, such as Dawn, to the water and swish it around until it’s full of suds.
5. Place the bottles and their parts into the container of soapy water.
6. Use a bottle cleaner brush or another instrument to scrub away any grime or debris.
   
   
7. Once everything is clean, place the items on a baby bottle drying rack if they are still wet. Let the bottles air dry; don’t wipe them with cloths or paper towels. This could transfer germs.
8. After the bottles have air-dried, store them somewhere that’s protected from dust and dirt.