Samsung POWERbot cycle doesn't complete

Frequently asked questions Does the vacuum make a map of my home? Your robot vacuum makes a virtual map using its Visionary Mapping feature. This feature keeps track of the vacuum's location by taking pictures of the ceiling. When the cycle completes, or if the vacuum is picked up, this map is erased. Some models that connect to SmartThings may be

Where to put the docking station to best ensure automatic recharging Automatic recharging occurs automatically at the end of the cycle or if the battery gets low during a cycle. In optimum conditions, the POWERbot will find its way back to the charger without intervention. You can also command the POWERbot to return by pressing Recharge on the POWE

Information and error codes let you know that your vacuum needs some attention. Most of the time, they can be cleared by turning off the emergency switch and performing the necessary steps. Find the appropriate code and then read the included information.

Using the remote is much more convenient than chasing after the POWERbot. If the remote isn't working, try replacing the batteries first, and if that doesn't work, there's a trick to knowing whether it's your remote or your POWERbot at fault.

The charging process for your vacuum is pretty self explanatory. Power at one end gets stored in the battery of your vacuum so it can operate without a power cord trailing behind it. If your vacuum does not charge, the most common reason is that it is not connected properly.