How to clean the air purifier filters
Enjoy fresh air by using Samsung air purifier we made it better to use of your living space, and easily clean and change the filter. The slim design ensures that it fits in almost anywhere, without taking up much room. And its front-sided air inlet means you can simply replace and maintain the filter without moving or pulling it away from the wall.
- Press the top part of the product with your thumb and pull the cover front with other fingers.
- Disassemble the pre filter.
- Remove big dust through dust collector in case of serious dust pollution, and then softly wash through warm water with neutral detergent.
- Dry pre filter completely in shade.
Note:
- Before detaching the air purifier filters, be sure to turn off the appliance and unplug the power cord.
- The filter lifespan is related to the air quality in the environment the machine is operated. The more polluted the air, the shorter the filter lifespan.
- Pre Filter (clean intervals: two weeks, 24 hours each day)
- Brush or similar tools may damage the pre filter.
The outside panels and sensors for Samsung Air Purifier should be cleaned as well because it may collect dust or become dirty.
- Remove the front panel.
- Press on the top of the product and pull the front panel
- Press on the top of the product and pull the front panel
2. Clean and dry the front panel
- Clean any dirt or dust on the front panel by using water and thoroughly dry the front panel before reattaching.
3. Clean the sensore
- Use a vacuum cleaner to clean the sensor and its surrounding.
This filter helps in removing harmful gasses such as carbon monoxide and unpleasant odors.
The 2 in 1 filter should be replaced regularly, Every 6-12 months if used 24 hours a day. as a reminder for the filter replacement you will be notified when it's time to replace it.
If you hear a beep sound and filter change lights up while the product is in use:
- Replace the filter.
- Press the Lighting button for 3 seconds or more to reset.
- If the filter has been replaced before, reset the status by pressing the Lighting for more than 3 seconds.
- Press the Lighting button to reset this feature as well.
Filter change reminder in separated type
Note:
- The filter cleaning and replacement cycles may vary depending on the operating environment.
- The filter change indicator may not work properly if you continue to use old filters without replacing them or performing the reset process without the filter.
- To purchase the filters, visit the nearest service center to your place.
Thank you for your feedback!
Please answer all questions.