How to level your Samsung refrigerator
Properly leveling your refrigerator is important for its performance and long-term reliability. If it isn’t level, you may notice issues like reduced cooling efficiency, doors that don’t close smoothly, or unnecessary noise. This guide walks you through simple steps and useful tips to make sure your Samsung refrigerator is leveled correctly. With the right tools and a few adjustments, you can keep your refrigerator stable, working efficiently, and helping your food stay fresh.
Note:
- The provided information refers to refrigerators sold in Canada.
- Always raise the leveling legs into the refrigerator and off the floor before moving the refrigerator to avoid damaging the floor.
- Exercise caution when leveling the refrigerator.
- The refrigerator must sit on a flat, solid floor to ensure proper leveling once it’s in place.
- An unlevel refrigerator can cause damage or create a risk of injury.
- Always level the refrigerator when it is empty and make sure no food remains inside.
- For safety and proper door operation, the front of the refrigerator should be slightly higher than the back. This small backward tilt helps the doors open and close more easily.
Gather the tools you’ll need before you begin leveling the refrigerator:
- A carpenter's level is required to level the refrigerator left to right.
- A flat-head screwdriver is required to turn the legs.
- A Phillips screwdriver may be required if a kick plate needs to be removed.
Once you have the required tools, continue to the next section for detailed instructions.
Before you begin adjusting the leveling legs, make sure the refrigerator is in its final location and that you have the necessary tools. Leveling the refrigerator correctly will help the doors open and close properly, reduce noise, and ensure the appliance operates efficiently. Follow the steps below to adjust the leveling legs and check the alignment:
- For easier access to the leveling legs on Side-by-Side and Four-Door models, open both doors.
- If your refrigerator has a front leg cover, remove it to access the leveling legs. This varies by model, as some covers do not need to be removed. To remove the cover, take out the screws with a Phillips screwdriver, then lift the cover from the bottom and pull it out.
Note: If the refrigerator is not level, identify which side is higher. On the higher side, rotate the leveling leg to the right and check the level again. Continue adjusting until the refrigerator is level.
Note: On most level floors, the front legs should be extended enough for the front wheels to lift off the floor.
Thank you for your feedback!
Please answer all questions.
RC01_Static Content : Hide call number function