1. Home
  2. /
  3. Connecting the Subwoofer to Your Soundbar (HW-K850)

Connecting the Subwoofer to Your Soundbar (HW-K850)

You can enjoy rich bass tones and better sound quality by linking the subwoofer to the soundbar.

• If you use a device that uses the same frequency (2.4GHz) as the soundbar near the soundbar, there may be some interference.

• The maximum transmission distance of the wireless signal of the main unit is about 32.8 f, but may vary depending on your environment.

Automatic Connection

  1. Plug the power cord into the DC 19V (Power Jack) jack located on the bottom panel of the soundbar.

       

       

  2. Plug the power cord into the subwoofer.

       

  3. Plug both power cords into AC wall outlets.

       

       

  4. Turn on the soundbar by pressing the Power button on the soundbar or remote.

       

       

  5. When the subwoofer is completely connected, the blue LED LINK Indicator on the subwoofer stop blinking and glows continuously.

       

       

    If the LINK Indicator does not stop blinking, the linking process has failed. Please check Manual Connection below.

Manual Connection

• Make sure the soundbar and subwoofer are plugged in.

  1. Turn on the soundbar by pressing the Power button on the soundbar or remote.

       

       

  2. Press and hold the ID SET button on the back of the subwoofer for 5 seconds.

       

       

  3. Continue holding until the STANDBY indicator (Red LED) turn off and the Link Indicator (Blue LED) blinks quickly.

       

       

  4. Turn off the soundbar by pressing the Power button on the soundbar or remote.

       

       

  5. Press and hold the Volume button on the remote control for 5 seconds.

       

       

  6. Continue holding until the ID SET message appears on the soundbar's display.

       

       

  7. To finalize the link, turn on the soundbar by pressing the Power button while the subwoofer's blue LED Indicator blinks.

       

       

  8. The soundbar and subwoofer should now be linked (connected).

       

       

    If the LINK Indicator on the subwoofer is still blinking, the linking process has failed. Turn off the soundbar and start again from step 1.

Was this content helpful?

Comments:

How would you like to contact us?

Give us a call 1-800-SAMSUNG (1-800-726-7864)
Mon - Fri : 8AM -12 AM (EST) Sat - Sun : 9AM -11 PM (EST)
Printer support visit: hp.com/support/samsung

Chat with us

Live Chat support with a Samsung product expert.

24 HOURS 7 DAYS A WEEK

Help with your order

Send us your inquiry and we will respond within 24 hours.

Social Support

Contact us on Twitter or Facebook and we'll reply with an answer to your question or issue.

Send us an Email

We’ll respond within 24 hours of your request.

Question about a promotion?

Learn more about Samsung promotions.