Clean station doesn't empty Jet Stick dustbin

Clean station doesn't empty Jet Stick dustbin
Insert the vacuum into the Clean Station until it clicks.
The bottom of the vacuum’s dustbin should line up with the top of the station. You will hear a click when it is placed correctly, letting you know that the station is ready.
If the vacuum doesn't connect with the Clean Station correctly, it can reduce the suction level of the Clean station and be less effective at emptying the dustbin.
Try to empty the dustbin again.
Press the START/STOP button on the top of the station, and then wait a moment for it to empty. (It shouldn't take long.)
After a few seconds, you can press START/STOP again to turn the clean station off and check if the dustbin is empty.
Readjust the vacuum.
Check if the dust bag is full.
Manually empty the dustbin.
In some cases, tangled hair and other forms of debris may be too much for the Clean Station to handle. In this case you'll need to manually clean the dustbin.