Setting Up A Samsung Smart Monitor

Information Icon Please Note: The information on this page is for Australian products only. Models, sequences, error codes or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.

Follow the below guide to learn how to use the Control Panel, the Anti-Theft Lock, tidying up the cables and setting up your Samsung Smart Monitor.

First, make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the diagram when installing the product. 

Checking space around the monitor

Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.

1 Put the stand base onto the stand neck as the direction shown in the figure. Check that the stand neck is firmly connected.
Put the stand base onto the stand neck as the direction shown in the figure. Check that the stand neck is firmly connected.
2 Tightly fasten the connecting screw at the bottom of the stand base. Fasten the large screw in the middle for assembly.
Tightly fasten the connecting screw at the bottom of the stand base. Fasten the large screw in the middle for assembly.
3 As shown in the figure, remove the product and foam cushion, and then place the product on the table with its front side facing the floor.
As shown in the figure, remove the product and foam cushion, and then place the product on the table with its front side facing the floor.
4 Push the assembled stand into the main body in the direction of the arrow as shown in the figure. Tightly fasten the connecting screw at the bottom of the main body.
Push the assembled stand into the main body in the direction of the arrow as shown in the figure. Tightly fasten the connecting screw at the bottom of the main body.
5 Stand assembly is complete.
Stand assembly is complete.

You can turn on the Smart Monitor with the Power button at the bottom of the product and then use the Control menu. The Control menu appears when the Power button is pressed while the product is On.

Viewing the Control Panel

A icon Control menu

  • Power Off: Turns off the product.
  • SOURCE: Change the SOURCE.
  • Volume Up / Volume Down: Adjust Volume.

B Icon Power indicator

  • The LED turns on when the product is turned off.
  • The LED blinks when the product enters the standby mode.

When 60 seconds elapses with no signal, the product enters the standby mode. In standby mode, the screen turns on again when any signal is input or any button is pressed on the remote control.

  • The colour and shape of parts may differ from what is shown.
  • The screen may dim if the protective film on the SAMSUNG logo or the bottom of the product is not detached. Please remove the protective film.
  • When using the buttons (excluding Power) on the Samsung Smart Remote, the receiver LED does not blink.
     

C icon  Power button / Remote control sensor

  • Short press: Moves to another item.
  • Long press: Selects the current item.

The Anti-Theft lock allows you to use your Smart Monitor securely even in public places. Follow the below for more information.

Setting up the Anti-Theft Lock
1 Fix the cable of your anti-theft locking device to a heavy object like a desk.
2 Put one end of the cable through the loop on the other end.
3 Insert the locking device into the anti-theft lock slot at the back of your Smart Monitor.
4 Lock the locking device
Viewing Ports on the back of the Smart Monitor
Port type & Description table

The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product.

1 Connect the corresponding cables into the back of your Smart Monitor
Plug in cables into Monitor
2 Pull the right side of the HOLDER-STAND CABLE to remove from the stand.
Pull out Holder stand cable
3 Put both cables into the cable holder on the stand (HOLDER-STAND CABLE) to organise the cables, then clip back into place.
Put cables into the cable holder then clip back into place

If you require further assistance, please consult the user manual from our Manuals & Downloads page or contact our Samsung Care Australia experts on 1300 362 603 (Toll Free in Australia). You can also contact our Chat Support team or reach us through Samsung Members Community.

Contact Info

Online

There are a number of a different ways of contacting us via Live Chat, Email and more

Chat Support : 24/7
Chat Support Help & Contact Us

Call

8am-8pm AEST / 7days a week
For general enquires and technical support
View more

Face to face Support

Whether your product is in warranty or out of warranty, we're here to help.
Find a support centre Request for Mobile Repair
View more

Samsung Online Store
online store online store

Shop online for the latest Samsung smartphones, tablets, wearables and accessories.
Samsung online store

Join Members Community
samsung members samsung members

Run device diagnostics, chat with Samsung Customer care or other Samsung fans, access to FAQs as well as tips & tricks without sending your device away
Ask the Community Using Samsung Members

Warranty Information
Warranty Information Warranty Information

Read the Terms & Conditions of your Samsung Warranty and Australian Consumer Law.
Read More

Apps & Services Customer Support

Samsung Pay : 1300 362 603
Samsung Rewards : 1300 362 603
Find My Mobile : 1800 216 454
Galaxy Store : 1800 216 454
Galaxy Themes : 1800 216 454
Samsung Account : 1800 216 454
View more