1. Home
  2. /
  3. NX58K7850: Removing and Re-installing the Oven Door

NX58K7850: Removing and Re-installing the Oven Door

To Remove the Oven Door

  1. Open the door completely.   

  2. Pull the hinge locks down toward the door frame to the unlocked position.   

  3. Firmly grasp both sides of the door at the top.  Close the door to the door removal position, which is approximately 5 degrees from vertical.  

  4. Lift door up and out until the hinge arm is clear of the slot.  

To Re-Install the Oven Door

You can re-install the upper door the same way you re -install the full door.

  1. Firmly grasp both sides of the door at the top.  

  2. With the door at the same angle as the removal position, slide the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into the bottom of the slot.  

  3. Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the bottom edge of the slot.  

  4. Push the hinge locks up against the front frame of the oven cavity into the locked position.  

  5. Close the oven door. 

Was this content helpful?

86 people found this helpful.

How would you like to contact us?

Give us a call 1-800-SAMSUNG (1-800-726-7864)
Mon – Fri: 8AM to 12AM (EST) Sat - Sun: Closed Printer support visit: hp.com/support/samsung

Chat with us

Live Chat support with a Samsung product expert.


Help with your order

Send us your inquiry and we will respond within 24 hours.

Social Support

Contact us on Twitter or Facebook and we'll reply with an answer to your question or issue.

Send us an Email

We’ll respond within 24 hours of your request.

Question about a promotion?

Learn more about Samsung promotions.