1. Home
  2. /
  3. Use Anynet+ (HDMI-CEC) on The Frame TV

Use Anynet+ (HDMI-CEC) on The Frame TV

Anynet+ is a Samsung brand of HDMI-CEC and it lets you control other Samsung external devices that support Anynet+ (HDMI-CEC) using the OneRemote.

Before You Begin

  • Anynet+ cannot be used to control external devices that do not support HDMI-CEC.

  • Anynet+ (HDMI-CEC) enabled devices must be connected to your Frame TV with an HDMI cable. Some HDMI cables may not support Anynet+ (HDMI-CEC).

  • If the OneRemote does not work, set up the device as an Anynet+ (HDMI-CEC) enabled device again.

  • Anynet+ (HDMI-CEC) can control up to 12 compliant external devices (up to 3 of the same type) except for home theater systems. Anynet+ can only control one home theater system.

  • To listen to 5.1 channel audio from an external device, connect the device to your Frame TV via an HDMI cable, and then connect a 5.1 home theater system directly to the external device's digital audio output connector.

  • If an external device has been set up for both Anynet+ and a universal remote control, the device can only be controlled with the universal remote control.

  • Non-Samsung external devices may cause Anynet+ to not work properly.

Connecting an External Device

  1. Press the Home button on your OneRemote.

  2. Navigate to Settings > General > External Device Manager.

  3. To turn on the Anynet+ function, select Anynet+ (HDMI-CEC).

  4. Connect an external device using an HDMI cable to the One Connect Box.

  5. Power on the external device. The device will automatically connect to the TV. After the connection is established, you can access the menu of the connected device using the OneRemote and control the device.

    The connection process can take up to 2 minutes to complete.

Troubleshooting

If Anynet+ does not work:

  • Make sure that the device supports Anynet+.

  • Check the power cord and cable connections of the Anynet+ device.

  • Make sure Anynet+ is enabled (Settings > General > External Device Manager > Anynet+ (HDMI-CEC)).

  • Make sure the remote control is Anynet+ compatible.

  • Anynet+ may not function when other functions are active, including Channel search, Smart Hub, Initial Setup, etc.

  • If you have disconnected and reconnected the HDMI cable, scan for devices again, or turn your Frame TV off and on.

If TV audio is not being played through the receiver:

  • Connect The Frame and receiver with an optical cable.

  • ARC is only available when your Frame TV is connected to an audio receiver that supports ARC.

Was this content helpful?

Comments:
21 people found this helpful.

How would you like to contact us?

Give us a call 1-800-SAMSUNG (1-800-726-7864)
Mon - Fri: 8AM - 12AM (EST) / Sat - Sun: 9AM - 11PM (EST) Sat - Sun: HOME APPLIANCE CLOSED Printer support visit: hp.com/support/samsung

Chat with us

Live Chat support with a Samsung product expert.

24 HOURS 7 DAYS A WEEK

Help with your order

Send us your inquiry and we will respond within 24 hours.

Social Support

Contact us on Twitter or Facebook and we'll reply with an answer to your question or issue.

Ask the Community

Browse answers, ask questions and get solutions from other Samsung customers.

Send us an Email

We’ll respond within 24 hours of your request.

Question about a promotion?

Learn more about Samsung promotions.