Rear Surround Setup Using the SWA-8000S Kit
Once connected, your soundbar and the Wireless Receiver Module are automatically reconnected, even after you turn them off and back on. A soundbar is required to use the SWA-8000S kit.
Only the Wireless Receiver Module is wireless. The two rear speakers are connected to the Wireless Receiver Module by wires.
Connecting the Speakers
Press the wire tabs and insert the speaker wires.
Make sure the color of the wire matches the wire tab. Also make sure the wires make contact with the metal component under each tab.
Connect the other end of the cable wires into the Wireless Receiver Module.
Plug in the power cable into the Wireless Receiver Module.
Plug the power cord of the Soundbar, Subwoofer, and Wireless Receiver into AC wall outlets.
Press and hold the ID SET button on the back of the wireless and receiver and subwoofer for 5 seconds.
Continue holding until the STANDBY indicators turn off and the LINK indicators (Blue LEDs) blinks quickly.
While the Soundbar is powered off (in STANDBY mode), press and hold the Mute button on the Soundbar remote until ID SET appears on the Soundbar's display.
When the LINK indicator (Blue LED) on the SWA-8000S blinks, power on the soundbar.
When the LINK indicators (Blue LEDs) on your subwoofer and the SWA-8000S glows continuously, the SWA-8000S has connected successfully. This process may take a few minutes. If the surround speaker's volume is low, try pairing the subwoofer and speakers again.
The optimal placements for the speakers are on the sides of where you will be listening to the audio. Try to position the speakers about 2 or 3 feet above your ear.
Compatible Soundbar Models
If the volume of the speakers is low, navigate to your TV's sound menu and then set the audio format to Dolby Digital.
How would you like to contact us?
Chat with us
Live Chat support with a Samsung Care Pro.
Help with your order
Send us your inquiry and we will respond within 24 hours.