Clean and care for your Jet Stick

You should clean your Jet Stick’s dustbin before it becomes completely full or reaches the Max label. As for the filter, you should try to clean it once a month if you use the vacuum regularly.

1. Before cleaning the vacuum cleaner, turn it off.
   
   
   
2. Press the dustbin release button on the vacuum, and then pull out the dustbin.
   
   
   
3. Carefully pull out the washable micro filter by holding the filter handles. Put the filter to the side to clean it later.
   
   
   
4. While pressing the button, twist the dustbin cover and then remove it from the dustbin.
   
   
   
5. Remove the dust on the metal mesh grille filter with the combination tool. Do NOT pull the rubber attached to the metal mesh grille filter.
   
   
   
6. Next, empty the dustbin. To prevent dust and lint from spilling everywhere, cover the dustbin with a bag. Tip the dustbin into the bag, tie up the bag, and then discard it. Afterward, clean the dustbin under running water.
7. You can also clean the filter under running water.
   
   
   
8. Let both the filter and the dustbin completely dry before reassembling the vacuum. We recommend letting them dry in a shaded area for a total of 24 hours.
   
9. Once the filter and dustbin are dry, you can reassemble the dustbin cover by aligning the dustbin release button with the groove of the dustbin.
   
   
10. Place the washable filter in the dustbin cover and fit it into the grooves of the cover.
    
    
    
11. Reinsert the dustbin back into the vacuum. Push it until you hear a click.