Handle controls on canister vacuum do not work

Set up the charging stand Before anything else, you’ll need to set up the vacuum’s charging stand. Think of it as the hub for your Jet Stick. Attach the vacuum’s stand pipe to the bottom support. Push the stand pipe in firmly, and make sure the screw hole is aligned properly. Tightly secure the pipe to the bottom support with the included small scr

Set Up Your Bespoke Jet Cordless Stick Vacuum Before diving into cleaning, ensure your vacuum is assembled and charged: Assembly: Connect the Telescopic Pipe to the vacuum's handle. Adjust the pipe's length as needed using the adjustment button. Attach the Jet Dual Brush at the pipe's end. For detailed information on accessories, refer to the “Use

If your ice bucket is stuck and won't come out, don't try to force it too hard. A little gentle wiggle should be all you need to shake it loose. If you've never removed your ice bucket before, don't fret: most have a trick to them, like a special angle to pull at, that makes it a lot easier. Some models also have a button or lever to release the ic

There are a few simple and easy ways to solve reasons why your ice maker may have no ice production. Checking the water filter, the water pressure, and testing the ice maker can hopefully get you back to making ice and having colder drinks in no time.

There are a few factors that can cause an ice maker to not work. If the ice maker appears to not be making any or enough ice, low water pressure or a faulty water filter may be to blame. When the ice maker makes small, cloudy, or clumped ice, it could be something as simple as a dirty water filter, low water pressure, or high mineral deposits in yo