Jetbot Mop remote is not working

Unbox your Jetbot Mop Your Jetbot Mop comes with everything you need to start cleaning. You can also use various cleaning modes to give your floors some extra scrubbing. The main unit of your Jetbot Mop has an obstacle detection sensor and a cliff detection sensor. These sensors will activate during the Jetbot Mop’s cleaning modes to help it move a

Charge your Jetbot Mop Note: Only use the provided charging adapter to charge your Jetbot Mop. Using another charging adapter may damage the battery. It takes about 100 minutes for your Jetbot Mop to fully charge, but may take longer if it's fully dead. To use your Jetbot Mop properly, it should be fully charged before running a cleaning cycle. Whe

Connect the remote Your Jetbot Mop’s remote requires two AAA batteries. After inserting the provided batteries in the remote, press and hold the Operation button on the Jetbot Mop. Then, press the Start/Stop button on the remote. Make sure the remote’s sensor is pointed in the direction of your Jetbot Mop. If the remote doesn’t connect, you may nee

Use your Jetbot Mop Note: Use only the provided power adapter when charging your Jetbot Mop. Your Jetbot Mop comes with a few accessories, like mop pads, that need to be attached to the main unit prior to cleaning. Before starting, you should charge the Jetbot Mop and select which mop pads to use. Ensure your Jetbot Mop is fully charged before begi

If your Jetbot Mop is not turning on, there are two things you can check. Make sure the main unit's power has been turned on, and then check if it has a proper charge. Your Jetbot Mop should be fully charged before each cleaning cycle. If the main unit isn’t charging completely, check that you are using the correct power adapter.