Charging the MovingStyle

Last Update date : Jun 16. 2026

Information Icon Please Note: The information on this page is for Australian products only. Models, sequences, error codes or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.

The Movingstyle has a built-in battery, allowing users to conveniently use it for a certain period of time without having to connect to a power source. Charge it on the floor stand or just use a USB-C cable, the MovingStyle is designed for easy charge. Find out how with the guide below.

  • To view the battery level, open the Edge Quick Settings and view the Status Bar. The remaining charge is displayed as a percentage on the screen.
  • You can also check detailed battery information and settings by going to Home > Settings > All Settings > General & Privacy > Battery.
Displaying the Edge Quick Settings with the battery level highlighted.

Charging with the Floor Stand

1 Plug power cable into the power port of the floor stand and the other end into power outlet.
diagram of power cable plugged into stand
2 Ensure the display is connected to the Floor Stand.
diagram of display being put on stand
3 Display will charge.

Charging with USB-C Cable

1 Plug an USB-C cable into the USB C port on the back of the display.
USB C on back of MovingStyle Display

Use the usb c charging port  port when charging the product. Fast charging at 65 W or higher is possible when charging with a PD (Power Delivery) adapter. (45W or higher if using a PD battery).

2 Connect the other end of the USB-C cable to a power outlet.
3 Display will charge.

The LED indicator is located on the back of the display at the bottom.

LED indicator on back of MovingStyle Display

Full Charging:

0 ~ 79 % Red / 80 ~ 94 % Yellow / 95 ~ 100 % Green

Charging in battery protection mode (charging limit: 85%):

0 ~ 64 % Red / 65 ~ 79 % Yellow / 80 ~ 85 % Green

Displaying Battery menu for The Movingstyle.

To optimise battery use, configure the following options in the battery settings:

  • Battery Saving: Automatically adjusts screen brightness when the charger is not connected to reduce power consumption. Some functions may be limited when this mode is active.
  • Battery Protection Mode: Restricts charging to 85% to help protect battery lifespan.

Charging and usage time: A full battery charge takes approximately 3 hours if the power cable is connected and is in standby mode, or about 3.5 hours when operating.

  • If the charging or usage time becomes significantly shorter than before, the battery may have reached the end of its lifespan. Contact Samsung Service Center for battery inspection or replacement.

 

Temperature conditions: Use and store the battery indoors at temperatures between 0 ℃ and 40 ℃

  • The battery may not charge if it is below 0 °C or above 50 °C. If this occurs, keep the product at room temperature for a while before charging.
  • If the battery temperature rises during use, the product may automatically turn off to protect the battery. Wait till it is cooled down, then turn it on again.

  NOTE:

  • Charging is supported with a 45 W or higher PD battery or PD adapter. To charge while the TV is in use, 65 W or higher is required. Charging through another device using USB-C may slow the charging time.
  • Actual cordless usage time may vary depending on the environment.
  • If the battery temperature rises, the product may shut down automatically for protection.
  • The battery is designed exclusively for this product; do not use it with other devices or for other purposes.
  • Using non-genuine batteries may cause malfunction or damage.
  • If you experience abnormal battery behavior or need a replacement, do not disassemble the product. Contact a nearby Samsung Service Center for assistance.

Thank you for your feedback!