Installing the Q-Series Soundbar on the TV Stand

Last Update date : Oct 14. 2026

Information Icon Please Note: The information on this page is for Australian products only. Models, sequences, error codes or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.

The Q-Series Soundbar is designed for simple installation, especially putting it directly on your compatible TV stand. Using the parts in the included kit, you will be able to make it convenient by putting the soundbar with the TV together. You can find out how to do so with the instructions below.

Required Parts

4 pieces of Rubber Foot

Note: 

  • May not be included in kit, depending on the product model. 

Installation

1 Attach the rubber foot to the bottom of the soundbar before placing it on top of the compatible TV stand. The rubber foot should not be placed in a way that it extends beyond the TV stand's width. Please see the diagram below.
4 pieces of Rubber Foot being place on bottom of soundbar diagram
2 Install the soundbar on your compatible TV. As shown in the diagram, align the centre of the TV with the centre of the soundbar, then carefully place the soundbar into the TV stand.
installing soundbar to the bottom of tv diagram

Make sure the microphone isn't blocked when placing the soundbar near the stand to ensure proper voice recognition.

ensuring microphone is not block when installing diagram
3 The installation will be completed.

  Notes:

  • This feature is not supported on the HW-Q600H model.
  • Make sure the soundbar is placed on a flat and solid surface. 
  • If the soundbar is too close to the TV, voice recognition may be affected, and audio issues could occur. 
  • The actual product may vary in appearance from the image above, depending on the model.
  • Place the soundbar at least 2 cm away from the TV for optimal microphone performance.

Thank you for your feedback!