Understanding the meaning of error codes on your Samsung dryer
Navigating the world of error codes on your Samsung dryer can be daunting, especially when your dryer isn’t functioning as expected. These codes are not just random characters; they are your dryer's way of communicating specific issues. Understanding what each code signifies is crucial for effective troubleshooting. This comprehensive guide will walk you through common error codes encountered in Samsung dryers, providing you with simple solutions to get your dryer back up and running. We cover everything from voltage and jammed button errors to more complex temperature and heating issues. Each section is designed to help you quickly identify and resolve problems with ease.
Note: The information provided here applies to Samsung dryers sold in Canada. Please note that an upside-down "F" in a code is intended to be a "t". Refer to the Temperature errors section for more details.
Voltage errors
9C1, 9E, 2E, 9E1
- These codes indicate abnormal voltage supply to the dryer.
- Check if the dryer is on its own circuit without an extension cord.
- For electric dryers, ensure proper power cord installation and correct voltage supply.
- Voltage errors may occur if the dryer is used outside the country it was intended for due to different power grids and regulations.
- If the error persists, visit our Service Centre.
Jammed button errors
bE, bE2, bC2, 6E, 6E2, 6C2
- Appears when a control panel button is stuck or continuously pressed.
- Power off the dryer, and press each button to release any stuck buttons.
- If buttons are damaged or the code reappears, visit our Service Centre to seek service.
Door-related errors
dC, dE, dF, do, d0, 1 DC, 1 dF
- These errors indicate issues with the door, its latch, or the sensors detecting their status.
- Ensure the latch is securely fixed, no items are obstructing the door, and it is closed properly.
- If the issue persists or there's visible damage, contact our Service Centre.
Temperature errors
tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, 1tCS
- Reflects issues with temperature or its sensors.
- Often caused by a clogged lint screen or vent system. Clean these to correct the error.
- If cleaning doesn’t resolve the issue, visit our Service Centre to seek professional service.
Heating errors
HC, hE, HC4, 1 HC
- Indicates the dryer is overheating.
- Commonly due to a clogged lint screen or vent. Clean these areas thoroughly.
- For electric dryers, a low voltage supply can cause insufficient heating; consult an electrician.
- If cleaning doesn’t help, it's time to visit our Service Centre to request service.
Communication errors
AC, Et, AE, EEE, AE4, AE3, AE5, E3, 1 AC
- Signals a failure in internal component communication. Restart the dryer to try resolving this.
- Persistent errors visit our Service Centre to require professional service.
Frequency errors
FC, FE, 1 FC
- Related to invalid power source frequency. Restarting the cycle might help.
- If the issue continues, visit our Service Centre to request service.
Vent Blockage test results
Clg, Cl9, Cg, C9, C80, C8o, C8, C90, C9o, Ct
- These codes appear after a Vent Blockage test:
- Clg, Cg: The vent is clogged.
- C80, C8: About 80% of the vent is clogged.
- C90, C9: Over 90% of the vent is clogged.
- C1, CL1: Laundry detected in the drum.
- Ct: Dryer is below freezing or above 104°F.
- Clg, Cg: The vent is clogged.
- Addressing vent blockages is crucial for the dryer's functionality.
Download in progress
dn
- Indicates firmware download. Avoid unplugging the dryer during this.
- If the code persists beyond 24 hours, contact our Service Centre.
All other errors
3C, oD, 1 AC7, HC2, etc.
- Covers various sensor and component issues.
- Restart the dryer and consult the user manual for specific troubleshooting steps.
- Recurring errors signal the need to visit our Service Centre to request professional service.
_JPG$)
Thank you for your feedback!
Please answer all questions.
The coding for Contact US > Call > View more function. And this text is only displayed on the editor page, please do not delet this component from Support Home. Thank you