Connecting the Speakers to the Q-Series Soundbar
Please Note: The information on this page is for Australian products only. Models, sequences, error codes or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.
The Q-Series Soundbar comes with a subwoofer and additional surround speakers* where setting them up can be very simple. It begins from connecting the power to the sound devices, which then leads to everything connecting together. These are essential first steps in ensuring a seamless listening experience for you. Find out how with the guide below.
* Surround speakers are only available for the HW-Q990H & HW-Q930H models.
Ensure the following components are available before setting up:
Soundbar
Subwoofer
Surround Speaker
x2 (Left/Right) (HW-Q990H/Q930H)
Power Cable
x4 (HW-Q990H/Q930H) or
x2 (HW-Q900H/Q800H/Q600H)
- Surround speaker may not be included with certain models.
Notes:
- First, connect the subwoofer and surround speakers to a power outlet, then turn on the soundbar once it is plugged in. When the soundbar is powered on, the subwoofer and surround speakers will automatically connect.
- If you disconnect the power cord while the soundbar is on, and reconnect it to a power outlet, the soundbar will automatically turn on.
- For more information on power supply and power consumption, refer to the label attached on the bottom or back of the product.
- Always grip the plug firmly and pull it directly when disconnecting the power cord from the wall outlet. Do not pull on the power cord itself.
If the sound devices do not connect automatically, you are able to manually connect them together through following these steps:
The ID SET message briefly appears on the soundbar display and then disappears. Afterwards, the soundbar will automatically power on.
Thank you for your feedback!
Please answer all questions.
Contact Info
Contact us
WhatsApp
![]()
![]()
