Using the Remote Control for the Q-Series Soundbar

1. Power

Turns the soundbar on or off. The soundbar will automatically turn off in the following situations. (Power saving mode)

• TV ARC, HDMI or HDMI 1/HDMI 2, Wi-Fi , BT (Bluetooth) ,D. IN (Digital Audio In) Mode: No audio signal input for 18 minutes or longer.

2. Source

• You can choose the device connected to the soundbar. 
• Turn voice feedback on or off You can turn voice feedback on or off. With the soundbar turned off (in Standby mode), press and hold the  (Source) button on the remote control for 5 seconds. Whenever you change the voice feedback settings, the display will show "AUI OFF " (default) or "AUI ON ". 

3. Bluetooth Connection

Puts the soundbar into the Bluetooth pairing mode. When you press the button, “BT PAIRING” will appear on the display and you can connect a new Bluetooth device.

4. Play/Pause & Up/Down/Left/Right

Use the Play/Pause buttons to starts or pause playback.

Use the Up/Down/Left/Right buttons to make fine adjustments.

• Skip a song: Press the Right button to skip to the next song. Press the Left button to go to the previous song.
• ID SET: Use this option if the subwoofer or surround speakers aren't connected and need to be reconnected. While powered off, press and hold the Up button for 5 seconds to perform ID SET . 

5. Mute

To mute the soundbar, press the (Mute) button. Press it again to unmute. 

6. Info

Press this button to view the codec information or the current status. In BT (Bluetooth) mode, the connected device (Paired) or BT READY (Need Pairing) will be displayed. 

7. Sound Mode

Select the desired sound mode among Surround, Game Pro, Standard, or Adaptive Sound.

• Standard: The original sound will be played back.
• Surround: Surround sound will be activated.
• Game Pro: This mode is optimised for gaming, helping provide a more immersive sound experience.
• Adaptive Sound: In this mode, content is analysed in real time and optimal sound is played based on the type of content. 

8. Volume 

• Slide the button up or down to adjust the volume.
• Press the button directly to mute. Press it again to unmute.

9. Woofer

You can adjust the woofer (bass) levels by sliding the button up or down. 

10. Channel Level

You can adjust the volume of each speaker including the Centre level, Side level, Wide level, Front Top level, Rear level, Rear top level and Rear side level.

• To adjust the volume of each speaker, select Centre level, Side level, Wide level, or Front Top level in the audio settings, then use the Up/Down buttons to adjust the volume within the range of -6 to +6. 
• When the surround speakers are connected, select Rear level, Rear top level or Rear side level and then use the Up/Down buttons to adjust the volume within the range of -6 to +6. 

11. Tone Control

Adjust the treble and bass levels by pressing the respective buttons. After selecting an option, use the Up/Down buttons to adjust the settings.

• This feature is available in all sound modes except the Standard mode.
• Adjust the treble or bass levels by selecting TREBLE or BASS in the Sound Control. Then, use the Up/Down buttons to adjust the volume level within the range of -6 to +6. 
• When adjusting the bass levels, the woofer levels will also be affected. 

12. Sound Control

You can select audio features such as SpaceFit Sound Pro,  AVA Pro, Sound Elevation, Auto Volume, Voice Enhancement, Night mode, Sync, Surround Speaker, Sound Grouping, Private Rear, Moderate Bass, Virtual.

For more information on what each feature does, click here.