Installing a Wall Mount for the Samsung Music Frame
Last Update date : Apr 17. 2026
Please Note: The information on this page is for Australian products only. Models, sequences, error codes or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.
The Samsung Music Frame is designed for easy wall mounting, allowing it to double as both a speaker and a stylish piece of wall decor. Using the included wall mount kit, you can securely install the Music Frame against your wall to create a clean, picture-frame look that blends seamlessly into your living space. You can find out how to do so with the instructions below.
Installation Precautions:
- Install on a vertical wall only.
- Do not install in a place with high temperature or humidity.
- Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall or choose another installation point.
- Connect cables from the unit to external devices before you install the Music Frame on the wall.
- Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
- Make sure you use the wall-mount component parts provided with this product
- Under any circumstances, any accident resulting from using third-party parts shall not be covered by the warranty.
Wall Mount Components
1
Place the Wall Mount Guide (A) against the wall surface.
![Placing Wall mount guide against wall surface diagram]()
- The Wall Mount Guide must be level.
- If you are mounting a device below a mounted object, install at least 10 cm apart.
2
Use a pen (not supplied) to mark the positions of the holes and remove the wall mount guide (A).
![Use a pen to mark the positions of the holes and remove the wall mount guide diagram]()
3
Using an appropriately sized drill bit (not supplied) and drill a hole in the wall at each marking.
- If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors or mollies into the holes before you insert the support screws. If you use anchors or mollies, make sure the holes you drill are large enough for the anchors or mollies you use.
4
Push a screwdriver (not supplied) through each screw (C), and then screw each of them firmly into the support screw holes of the bracket-wall mount (B).
![Pushing a screw through the drilledi holes diagram]()
5
Tighten the wall-mounting holder screw (E) on to the back of the product.
![Tightening the wall mounting holder screw on back of music frame diagram]()
CAUTION:
- Tighten the screw firmly until it does not move at all. Otherwise, the product may fall off and cause damage or physical injury. Any accident resulting from improper installation shall not be covered by the warranty.
6
Remove the liners (x2) of the double-sided adhesive tape from the spacers (F). Then, put them on the marked sites (x2) on the back of the product.
![Tightening the wall mounting holder screw on back of music frame diagram]()
- The spacers (F) must be attached to prevent the product from moving out of the wall-mount installation. On the stand installation, it must be kept safely for later use. When reusing it, use a double-sided adhesive tape for attachment.
7
Place the Music Frame on the wall-mount bracket (B). Make sure the holder screw (E) is inserted properly on the Music Frame.
![how to install the music frame on the wall mount diagram]()
- On the wall-mount installation, make sure the screw (E) is secured to the centre hole of the bracket (B).
Thank you for your feedback!
Please answer all questions.
Contact Info
Contact us
For support buying a product, help with an order or technical product support
WhatsApp
![]()
![]()
It's now even easier to get in contact with Samsung Customer Care, now on WhatsApp.
Troubleshoot and book a repair
Support for your mobile devices, home appliances, TV and computing products