Samsung Refrigerator - Replace the water filter
You need a clean water filter to get fresh, filtered water. We recommend that you replace the water filter every six months. The refrigerator's water filter light will let you know when those six months are up and should be reset after changing the filter.
The provided information refers to refrigerators sold in Canada. The available settings and options may differ for appliances sold in other countries.
To replace the water filter, turn off the water supply, and then turn the filter counterclockwise while pulling it out (or down). Reinstall a new filter by pushing it into place and then turning it clockwise. Make sure the lock icon lines up with the filter housing.
Turn the water supply back on again, and dispense some water. Oh, and don't forget to reset the filter light so you can stay on top of your filter replacement schedule.
How will you know when it's time to replace the water filter? That's easy; the filter icon will let you know. When the filter is new, the filter light light may be blue, yellow, or green, depending on the model. As a reminder, the icon will turn purple when it's almost time to change the filter. After 6 months, the icon will turn red when you need to replace it. Once it's red, change it right away so you can have high-quality water.
The water filter light operates on a timer designed for average household use and will turn on after 6 months (for models where the indicator is always lit, it will turn red after 6 months). Depending on the quality of the water in your area or the amount of water you dispense, you may want to change the filter more or less frequently than the light suggests. To determine if a new filter is needed, dispense water first with the filter installed and then with it removed. If the speed the water dispenses at is significantly different, replace the filter whether the indicator is lit or not.
Typically you will want to reset the indicator when you put a new filter in, or you may want to reset it to make it go away since your filter is still fine. To do so, look closely at your control panel. On most control panels, a Filter Reset button is available, sometimes as the secondary function of another button. For instructions specific to your refrigerator, see your user manual.
Once located, touch and hold the correct button for 3 seconds until the light resets. The filter icon will either turn off or change back to its normal color when it's reset. This starts the 6 month timer over again.
Some models may require two buttons to be touched simultaneously to reset the light. Touch screen models will use on-screen menus instead. For instructions specific to your refrigerator, see your user manual.
After replacing the water filter, you will need to reset the water filter light. From the Home screen, navigate to and select Fridge Manager, then select Fridge Settings. Tap the filter icon. Tap Reset, and then tap Proceed. Just like that, your refrigerator's water filter light will be reset.
After tapping the water filter icon, you can tap Buy Filter to purchase a Samsung water filter.
Navigate to and select the Settings icon at the bottom of the display, and then tap Water Filter. When the Water Filter menu opens, tap Next in the bottom right corner 3 times until you reach "page 4/4" of the Water Filter menu. Touch and hold Reset the water filter in the middle of the display until the status of the filter changes. After Filter Replaced pops up and goes away, tap Save in the bottom right corner of the display.
The National Sanitation Foundation (NSF) has various standards to identify what is filtered by a water filter. Samsung's water filters are Carbon Filters rated for the NSF Standard 42, NSF Standard 53, and NSF Standard 401. For more information about these standards, visit National Sanitation Foundation.
NSF 42 certification
- Filtered to reduce aesthetic impurities such as chlorine and taste/odor.
- Particulate reduction (Class I).
NSF 53 certification
- Certified to reduce a contaminant with a health effect. Health effects are set in this standard as regulated by the U.S. Environmental Protection Agency (EPA) and Health Canada.
- Reduce or remove the following contaminants in water: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst(99.99%), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene. As a consequence, it also reduces the degree of turbidity in water.
NSF 401 certification
- Verified to reduce one or more of 15 emerging contaminants from drinking water. These emerging contaminants can be pharmaceuticals or chemicals not yet regulated by the EPA or Health Canada.
- Reduce or remove the following contaminants in water: Atenolol, Bisphenol A, Carbamazepine, DEET, Estrone, Linuron, Nonylphenol, Phenytoin, Trimethoprim.
Thank you for your feedback!