Layout and Functions of the AR5500 and AR9500 Samsung Air Conditioner

Last Update date : Oct 13. 2021

Information Icon Please Note: The information on this page is for Australian products only. Models, sequences, error codes or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.

Samsung Air Conditioners are designed to cool your space fast and at the same time minimise energy consumption. It also makes use of the Easy Filter Plus to protect you against airborne contaminates.

To give you an understanding of where to locate these filters as well as the basic layout and functions of your air conditioner, please select your model from the boxes below or continue scrolling.

GEO AR5500 Split System

AR5500 Layout & Functions

GEO Wind-Free™ AR9500 Split System

AR9500 Layout & Functions

GEO AR5500

Indoor Unit

GEO AR550 diagram

1. Air intake

2. Air filter

3. Front panel

4. Airflow blade (up and down)

5. Airflow blade (left and right)

6. Power button/Remote control receiver

7. Room temperature sensor

8. Display

Indoor Unit Display

1. Temperature indicator (numeric)
Filter reset indicator (CF)
Auto clean indicator (C1)
Defrost indicator (dF)

2. Timer indicator
Good sleep indicator

3. Eco indicator

Remote Control

1. Set temperature indicator
2. Timer option indicator
3. Operation mode indicator
4. Options indicator
5. Low battery indicator
6. Transmit indicator
7. Fan speed indicator
8. Vertical air swing indicator
9. Horizontal air swing indicator
10. Power button
11. Temperature button
12. Timer button
13. Fan speed button
14. Direction button/Selection button
15. Vertical air swing button
16. Mode button
17. Fast/Eco button
18. Horizontal air swing button
19. Options/Clean button
20. SET button/Temperature type button(℃↔℉)

Note: Although HEAT, Purify, Direct, Indirect and Usage appear on the remote control display, they are not available on this model.


Selecting an Operation Mode

To change the current mode between Auto, Cool, Dry, Fan and Heat, press the Circle with the word Mode (Mode) button.

Note: You can use the Cool, Dry and Heat modes in the following operation range.

AR5500 Remote Control


Mode Cool Dry Heat
Indoor temperature 16°C to 32°C 18°C to 32°C 27°C or less
Outdoor temperature -10°C to 46°C -10°C to 46°C -15°C to 24°C*
Indoor humidity Relative humidity of 80% or less** ~ ~


*If the outdoor temperature drops to -15°C, the heating capacity may decrease by as much as 60-70%.

**If the air conditioner operates in Cool mode in a high-humidity environment for an extended period of time, condesation may occur.


Setting the temperature

To control the temperature in each mode, press the Temperature button with a plus and minus sign (Temperature) button.

AR5500 Remote Control




To adjust the fan speed

Select from the following fan speeds in each mode


Mode Available fan speeds
Auto/Dry Auto fan icon (Auto)
Cool/Fan/Heat Auto fan icon (Auto), Low fan speed (Low), Medium fan speed (Med), High fan speed (High), Turbo fan speed (Turbo)

To adjust the fan flow direction

Keep the airflow in a constant direction by stopping the movements of the vertical and horizontal airflow blades.

 

In operation > Vertical airflow icon or Horizontal airflow icon

GEO AR9500 Wind-Free

Indoor Unit

AR9500 Wind-Free Layout

1. Air intake

2. Air filter

3. Tri-care filter

4. Wind-Free panel

5. Airflow blade (up and down)

6. Airflow blade (left and right)

7. Power button/Remote control receiver

8. Room temperature sensor

9. Display

Note:

  • If the Wi-Fi indicator blinks for 10 seconds when operation starts, it means that the air conditioner is not connected to Wi-Fi.
  • When connected to Wi-Fi, the air conditioner can gather and learn your user patterns so that it can run in AI Auto mode.

Indoor Unit Display

1. Temperature indicator (numeric)
Filter reset indicator (CF)
Electricity consumption indicator (numeric)
Auto clean indicator (C1)
Defrost indicator (dF)

2. AI Auto indicator

3. Timer indicator
Good sleep indicator

4. Wi-Fi indicator

Note:

  • If the Wi-Fi indicator blinks for 10 seconds when operation starts, it means that the air conditioner is not connected to Wi-Fi.
  • When connected to Wi-Fi, the air conditioner can gather and learn your user patterns so that it can run in AI Auto mode.

Remote Control

1. Set temperature indicator
2. Timer option indicator
3. Operation mode indicator
4. Options indicator
5. Low battery indicator
6. Transmit indicator
7. Fan speed indicator
8. Wind-Free indicator
9. Vertical air swing indicator
10. Horizontal air swing indicator
11. Power button
12. Temperature button
13. Timer button
14. Fan speed button
15. Direction button/Selection button
16. Vertical air swing button
17. Mode button
18. Fast/Wind button
19. Horizontal air swing button
20. Options/Clean button
21. SET button/Temperature type button(℃↔℉)

Note: Although HEAT, Purify, Direct, Indirect and Usage appear on the remote control display, they are not available on this model.


Selecting an Operation Mode

To change the current mode between Auto, Cool, Dry, Fan and Heat, press the Circle with the word Mode (Mode) button.

 

You can use AI Auto mode after Wi-Fi is connected.

Note: You can use the Cool, Dry and Heat modes in the following operation range.

AR9500 Remote Control


Mode Cool Dry Heat
Indoor temperature 16°C to 32°C 18°C to 32°C 27°C or less
Outdoor temperature -10°C to 46°C -10°C to 46°C -15°C to 24°C*
Indoor humidity Relative humidity of 80% or less** ~ ~


*If the outdoor temperature drops to -15°C, the heating capacity may decrease by as much as 60-70%.

**If the air conditioner operates in Cool mode in a high-humidity environment for an extended period of time, condesation may occur.


Setting the temperature

To control the temperature in each mode, press the Temperature button with a plus and minus sign (Temperature) button.


(Temperature) button.

AR9500 Remote Control



Mode Temperature control
Auto/Cool/Heat Adjust by 1℃ from 16℃ to 30℃
Dry Adjust by 1℃ from 18℃ to 30℃
Fan No temperature control



To adjust the fan speed

Select from the following fan speeds in each mode


Mode Available fan speeds
Auto/Dry Auto fan icon (Auto)
Cool/Fan/Heat Auto fan icon (Auto), Low fan speed (Low), Medium fan speed (Med), High fan speed (High), Turbo fan speed (Turbo)

To adjust the fan flow direction

Keep the airflow in a constant direction by stopping the movements of the vertical and horizontal airflow blades.

 

In operation > Vertical airflow icon or Horizontal airflow icon

If you require further assistance, please consult the user manual from our Manuals & Downloads page or contact our Samsung Care Australia experts on 1300 362 603 (Toll Free in Australia). You can also contact our Chat Support team or reach us through Samsung Members Community.

Thank you for your feedback!