Cleaning your Jet™ Stick Dustbin and Filters

Last Update date : Aug 14. 2025

Information Icon Please Note: The information on this page is for Australian products only. Models, sequences, error codes or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.

During the process of using your Samsung Jet™ Stick vacuum to clean your home, the Jet™ Stick may begin to have build-up dust, dirt, and anything else it picks. This build-up can decrease the performance of your Jet™ Stick.

Follow the guide below for cleaning your Jet™ Stick dustbin and filters, including micro and fine dust.

Note: 

  • If you have foreign matter clogged in the wheels of your Jet™ Stick, you will need to contact our technical experts.
  • If you need to purchase a new Vacuum Filter for your Jet™ Stick, click here.
How to clean jet stick filters and dustbin How to clean jet stick filters and dustbin
Note:
  • If you notice the display of your Jet™ Stick lighting up and are unsure what the icons mean, please refer to our Checking your Jet™ Stick Display page for more information.
  • For instructions of how to clean the brush of your Jet™ Stick, please click here.
  • If you are after information on Replacing the Clean Station™ Dust Bag, please click here.
  • For information setting up and using the Jet™ Stick, click here.
  • For information on cleaning the BESPOKE Jet™ Stick, click here.
1 While the Jet™ Stick vacuum is turned off, press the dustbin release button (1), and then pull the dustbin down (2) as shown in the picture below.
press the dustbin release button
2 Pull the washable micro filter out by holding the filter handles located inside the filter.
Pull out the filter
3 While pressing the button (1), turn the dustbin cover (2) and remove it from the dustbin (3).
Press the button and twist the dustbin to remove it
4 Remove the dust from the metal mesh grille filter by using the combination tool.


Note: Do NOT pull the rubber attached to the metal mesh grille filter.

Remove dust from the filter by using the combination tool
5 After emptying the dustbin, clean the dustbin and filter under running water and leave it to dry in the shade out of direct sunlight.


Tip: With the dustbin upright and a bag over the top, tip the dustbin so the contents fall into the bag to reduce dust clouds.

Remove dust from the filter by using the combination tool
6 Reassemble the dustbin cover by aligning the release button with the groove. The dustbin and filter must be completely dry before reassembling the vacuum.
Reassemble the dustbin in
7 Put the washable micro filter in the dustbin cover by fitting the groove on the filter first, as shown in the picture below.
Put the washable micro filter in
8 Assemble the dustbin to the vacuum until you hear a click by following the order shown in the picture below.
Assemble the dustbin to the vacuum

Washable Micro Filter:

1 Remove the micro washable filter.
Pull out the filter
2 Remove any dust and clean with water after removal. It is recommended to clean it about once a month. Be sure to dry your washable micro filter completely in the shade* for 24 hours or more before reassembling for use.

*When heat is applied, product malfunction can occur.

Ultra Fine Dust Filter:

1 Detach the ultra fine dust filter (1) by turning it clockwise, and remove any foreign matter (2). Then, twist the filter back on (3).

*When assembling, turn the filter until the line below the lock image is not visible.

For further assistance, please contact our Chat Support . To find your Samsung product's User Manual, head to Manuals & Downloads.

Find everything your vacuum needs,
all in one place.

Thank you for your feedback!